AU Core Implementation Guide
0.3.0-ballot - R1 Australia flag

This page is part of the AU Core (v0.3.0-ballot: AU Core R1 Ballot 5) based on FHIR (HL7® FHIR® Standard) R4. . For a full list of available versions, see the Directory of published versions

Resource Profile: AU Core Heart Rate

Official URL: http://hl7.org.au/fhir/core/StructureDefinition/au-core-heartrate Version: 0.3.0-ballot
Standards status: Draft Maturity Level: 0 Computable Name: AUCoreHeartRate

Copyright/Legal: Used by permission of HL7 International, all rights reserved Creative Commons License. HL7 Australia© 2022+; Licensed Under Creative Commons No Rights Reserved.

This resource includes SNOMED Clinical Terms™ (SNOMED CT®) which is used by permission of the International Health Terminology Standards Development Organisation (IHTSDO). All rights reserved. SNOMED CT®, was originally created by The College of American Pathologists. “SNOMED” and “SNOMED CT” are registered trademarks of the IHTSDO. The rights to use and implement or implementation of SNOMED CT content are limited to the extent it is necessary to allow for the end use of this material. No further rights are granted in respect of the International Release and no further use of any SNOMED CT content by any other party is permitted.

This material contains content from LOINC (http://loinc.org). LOINC is copyright © 1995-2021, Regenstrief Institute, Inc. and the Logical Observation Identifiers Names and Codes (LOINC) Committee and is available at no cost under the license at http://loinc.org/license. LOINC® is a registered United States trademark of Regenstrief Institute, Inc.

All copies of this resource must include this copyright statement and all information contained in this statement.

This profile sets minimum expectations for an Observation resource to record, search, and fetch heart rate observations with standard coding and units of measure. It is based on the FHIR Heart Rate Profile and identifies the additional mandatory core elements, extensions, vocabularies and value sets that SHALL be present in the Observation resource when conforming to this profile. It provides the floor for standards development for specific uses cases in an Australian context.

Usage scenarios

The following are supported usage scenarios for this profile:

  • Query for observations of heart rate associated with a patient
  • Record or update an observation of heart rate associated with a patient

Comparison with other national and international specifications

A resource conforming to this profile is conformant to:

Conformance in reverse is not guaranteed, i.e. a resource conforming to International Patient Access, International Patient Summary, or US Core MAY NOT conform to AU Core.

Profile specific implementation guidance

  • Observation.category provides an efficient way of supporting system interactions, e.g. restricting searches. Implementers need to understand that data categorisation is somewhat subjective. The categorisation applied by the source may not align with a receiver’s expectations.
  • Observations MAY have additional codes that translate or map to the Observation code or category codes. For example:
    • providing a local code
    • providing a more specific codes such as 8306-3 - Body height - lying in addition to 8302-2 - Body height. Several additional observation codes are provided in the FHIR core specification vital signs table.
  • Observations MAY have [component] observations to qualify the vital sign observation. For example, 8478-0 - Mean blood pressure, 8887-2 - Heart rate device type, 8326-1 - Type of body temperature device. Several of these are provided in the FHIR core specification vital signs table.

Feedback is requested on the proposal to remove Must Support from Observation.performer element across AU Core Vital Signs profiles. Please comment on HL7 Jira FHIR-44786.

Usage:

Formal Views of Profile Content

Description of Profiles, Differentials, Snapshots and how the different presentations work.

This structure is derived from observation-heartrate

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation 0..*observation-heartrateHeart rate
... status 1..1coderegistered | preliminary | final | amended +
Fixed Value: final
... code
.... coding 2..*CodingCode defined by a terminology system
.... coding:snomedHeartRateCode 1..1CodingSNOMED CT Heart Rate
..... system 1..1uriIdentity of the terminology system
Fixed Value: http://snomed.info/sct
..... code 1..1codeSymbol in syntax defined by the system
Fixed Value: 364075005
... subject 1..1Reference(AU Core Patient)Who and/or what the observation is about
... effective[x] C1..1dateTimeDate, and optionally time, the observation was performed
au-core-obs-01: Date shall be at least to day
... performer S0..*Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | RelatedPerson)Who is responsible for the observation
... value[x] 0..1QuantityHeart rate
... dataAbsentReason 0..1CodeableConceptWhy the result is missing
... bodySite C0..1CodeableConceptObserved body part
Binding: Body Site . (preferred)
au-core-obs-04: If a coded body site is provided, at least one code shall be from SNOMED CT

doco Documentation for this format

Terminology Bindings (Differential)

PathConformanceValueSetURI
Observation.bodySitepreferredBodySite .
https://healthterminologies.gov.au/fhir/ValueSet/body-site-1

Constraints

IdGradePath(s)DetailsRequirements
au-core-obs-01errorObservation.effective[x]Date shall be at least to day
: $this is DateTime implies $this.toString().length() >= 10
au-core-obs-04errorObservation.bodySiteIf a coded body site is provided, at least one code shall be from SNOMED CT
: coding.exists() implies coding.where(system='http://snomed.info/sct').exists()
NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation C0..*observation-heartrateHeart rate
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
vs-2: If there is no component or hasMember element then either a value[x] or a data absent reason must be present.
... implicitRules ?!Σ0..1uriA set of rules under which this content was created
... modifierExtension ?!0..*ExtensionExtensions that cannot be ignored
... status ?!SΣ1..1coderegistered | preliminary | final | amended +
Binding: ObservationStatus (required)
Fixed Value: final
.... category:VSCat S1..1CodeableConceptClassification of type of observation
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


..... coding SΣ1..*CodingCode defined by a terminology system
...... system SΣ1..1uriIdentity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
...... code SΣ1..1codeSymbol in syntax defined by the system
Fixed Value: vital-signs
... code SΣ1..1CodeableConceptHeart Rate
Binding: VitalSigns (extensible): This identifies the vital sign result type.

.... Slices for coding Σ2..*CodingCode defined by a terminology system
Slice: Unordered, Open by value:code, value:system
..... coding:HeartRateCode Σ1..1CodingCode defined by a terminology system
...... system Σ1..1uriIdentity of the terminology system
Fixed Value: http://loinc.org
...... code Σ1..1codeSymbol in syntax defined by the system
Fixed Value: 8867-4
..... coding:snomedHeartRateCode Σ1..1CodingSNOMED CT Heart Rate
...... system Σ1..1uriIdentity of the terminology system
Fixed Value: http://snomed.info/sct
...... code Σ1..1codeSymbol in syntax defined by the system
Fixed Value: 364075005
... subject SΣ1..1Reference(AU Core Patient)Who and/or what the observation is about
... encounter SΣ0..1Reference(AU Core Encounter)Healthcare event during which this observation is made
... effective[x] SΣC1..1dateTimeDate, and optionally time, the observation was performed
vs-1: if Observation.effective[x] is dateTime and has a value then that value shall be precise to the day
au-core-obs-01: Date shall be at least to day
... performer SΣ0..*Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | RelatedPerson)Who is responsible for the observation
... Slices for value[x] SΣC0..1QuantityHeart rate
Slice: Unordered, Closed by type:$this
.... value[x]:valueQuantity SΣC0..1QuantityVital Signs value are recorded using the Quantity data type. For supporting observations such as Cuff size could use other datatypes such as CodeableConcept.
..... value SΣ1..1decimalNumerical value (with implicit precision)
..... comparator ?!Σ0..1code< | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.

..... unit SΣ1..1stringUnit representation
..... system SΣC1..1uriSystem that defines coded unit form
Fixed Value: http://unitsofmeasure.org
..... code SΣ1..1codeCoded responses from the common UCUM units for vital signs value set.
Fixed Value: /min
... dataAbsentReason SC0..1CodeableConceptWhy the result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

... bodySite C0..1CodeableConceptObserved body part
Binding: Body Site . (preferred)
au-core-obs-04: If a coded body site is provided, at least one code shall be from SNOMED CT
... component SΣC0..*BackboneElementUsed when reporting systolic and diastolic blood pressure.
vs-3: If there is no a value a data absent reason must be present
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... code SΣ1..1CodeableConceptType of component observation (code / type)
Binding: VitalSigns (extensible): This identifies the vital sign result type.

.... value[x] SΣC0..1Vital Sign Value recorded with UCUM
Binding: VitalSignsUnits (required): Common UCUM units for recording Vital Signs.

..... valueQuantityQuantity
..... valueCodeableConceptCodeableConcept
..... valueStringstring
..... valueBooleanboolean
..... valueIntegerinteger
..... valueRangeRange
..... valueRatioRatio
..... valueSampledDataSampledData
..... valueTimetime
..... valueDateTimedateTime
..... valuePeriodPeriod
.... dataAbsentReason SC0..1CodeableConceptWhy the component result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.


doco Documentation for this format

Terminology Bindings

PathConformanceValueSet / CodeURI
Observation.statusrequiredFixed Value: final
http://hl7.org/fhir/ValueSet/observation-status|4.0.1
from the FHIR Standard
Observation.categorypreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.category:VSCatpreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.codeextensibleVitalSigns
http://hl7.org/fhir/ValueSet/observation-vitalsignresult
from the FHIR Standard
Observation.value[x]:valueQuantity.comparatorrequiredQuantityComparator
http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1
from the FHIR Standard
Observation.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard
Observation.bodySitepreferredBodySite .
https://healthterminologies.gov.au/fhir/ValueSet/body-site-1
Observation.component.codeextensibleVitalSigns
http://hl7.org/fhir/ValueSet/observation-vitalsignresult
from the FHIR Standard
Observation.component.value[x]requiredVitalSignsUnits
http://hl7.org/fhir/ValueSet/ucum-vitals-common|4.0.1
from the FHIR Standard
Observation.component.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
au-core-obs-01errorObservation.effective[x]Date shall be at least to day
: $this is DateTime implies $this.toString().length() >= 10
au-core-obs-04errorObservation.bodySiteIf a coded body site is provided, at least one code shall be from SNOMED CT
: coding.exists() implies coding.where(system='http://snomed.info/sct').exists()
dom-2errorObservationIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3errorObservationIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4errorObservationIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5errorObservationIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6best practiceObservationA resource should have narrative for robust management
: text.`div`.exists()
ele-1error**ALL** elementsAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1error**ALL** extensionsMust have either extensions or value[x], not both
: extension.exists() != value.exists()
obs-6errorObservationdataAbsentReason SHALL only be present if Observation.value[x] is not present
: dataAbsentReason.empty() or value.empty()
obs-7errorObservationIf Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
: value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()
vs-1errorObservation.effective[x]if Observation.effective[x] is dateTime and has a value then that value shall be precise to the day
: $this is dateTime implies $this.toString().length() >= 10
vs-2errorObservationIf there is no component or hasMember element then either a value[x] or a data absent reason must be present.
: (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
vs-3errorObservation.componentIf there is no a value a data absent reason must be present
: value.exists() or dataAbsentReason.exists()
NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation C0..*observation-heartrateHeart rate
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
vs-2: If there is no component or hasMember element then either a value[x] or a data absent reason must be present.
... id Σ0..1idLogical id of this artifact
... meta Σ0..1MetaMetadata about the resource
... implicitRules ?!Σ0..1uriA set of rules under which this content was created
... language 0..1codeLanguage of the resource content
Binding: CommonLanguages (preferred): A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
... text 0..1NarrativeText summary of the resource, for human interpretation
... contained 0..*ResourceContained, inline Resources
... extension 0..*ExtensionAdditional content defined by implementations
... modifierExtension ?!0..*ExtensionExtensions that cannot be ignored
... identifier Σ0..*IdentifierBusiness Identifier for observation
... basedOn Σ0..*Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest)Fulfills plan, proposal or order
... partOf Σ0..*Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy)Part of referenced event
... status ?!SΣ1..1coderegistered | preliminary | final | amended +
Binding: ObservationStatus (required)
Fixed Value: final
... Slices for category S1..*CodeableConceptClassification of type of observation
Slice: Unordered, Open by value:coding.code, value:coding.system
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


.... category:VSCat S1..1CodeableConceptClassification of type of observation
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


..... id 0..1stringUnique id for inter-element referencing
..... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
..... coding SΣ1..*CodingCode defined by a terminology system
...... id 0..1stringUnique id for inter-element referencing
...... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
...... system SΣ1..1uriIdentity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
...... version Σ0..1stringVersion of the system - if relevant
...... code SΣ1..1codeSymbol in syntax defined by the system
Fixed Value: vital-signs
...... display Σ0..1stringRepresentation defined by the system
...... userSelected Σ0..1booleanIf this coding was chosen directly by the user
..... text Σ0..1stringPlain text representation of the concept
... code SΣ1..1CodeableConceptHeart Rate
Binding: VitalSigns (extensible): This identifies the vital sign result type.

.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
.... Slices for coding Σ2..*CodingCode defined by a terminology system
Slice: Unordered, Open by value:code, value:system
..... coding:HeartRateCode Σ1..1CodingCode defined by a terminology system
...... id 0..1stringUnique id for inter-element referencing
...... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
...... system Σ1..1uriIdentity of the terminology system
Fixed Value: http://loinc.org
...... version Σ0..1stringVersion of the system - if relevant
...... code Σ1..1codeSymbol in syntax defined by the system
Fixed Value: 8867-4
...... display Σ0..1stringRepresentation defined by the system
...... userSelected Σ0..1booleanIf this coding was chosen directly by the user
..... coding:snomedHeartRateCode Σ1..1CodingSNOMED CT Heart Rate
...... id 0..1stringUnique id for inter-element referencing
...... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
...... system Σ1..1uriIdentity of the terminology system
Fixed Value: http://snomed.info/sct
...... version Σ0..1stringVersion of the system - if relevant
...... code Σ1..1codeSymbol in syntax defined by the system
Fixed Value: 364075005
...... display Σ0..1stringRepresentation defined by the system
...... userSelected Σ0..1booleanIf this coding was chosen directly by the user
.... text Σ0..1stringPlain text representation of the concept
... subject SΣ1..1Reference(AU Core Patient)Who and/or what the observation is about
... focus Σ0..*Reference(Resource)What the observation is about, when it is not about the subject of record
... encounter SΣ0..1Reference(AU Core Encounter)Healthcare event during which this observation is made
... effective[x] SΣC1..1dateTimeDate, and optionally time, the observation was performed
vs-1: if Observation.effective[x] is dateTime and has a value then that value shall be precise to the day
au-core-obs-01: Date shall be at least to day
... issued Σ0..1instantDate/Time this version was made available
... performer SΣ0..*Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | RelatedPerson)Who is responsible for the observation
... Slices for value[x] SΣC0..1QuantityHeart rate
Slice: Unordered, Closed by type:$this
.... value[x]:valueQuantity SΣC0..1QuantityVital Signs value are recorded using the Quantity data type. For supporting observations such as Cuff size could use other datatypes such as CodeableConcept.
..... id 0..1stringUnique id for inter-element referencing
..... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
..... value SΣ1..1decimalNumerical value (with implicit precision)
..... comparator ?!Σ0..1code< | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.

..... unit SΣ1..1stringUnit representation
..... system SΣC1..1uriSystem that defines coded unit form
Fixed Value: http://unitsofmeasure.org
..... code SΣ1..1codeCoded responses from the common UCUM units for vital signs value set.
Fixed Value: /min
... dataAbsentReason SC0..1CodeableConceptWhy the result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

... interpretation 0..*CodeableConceptHigh, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


... note 0..*AnnotationComments about the observation
... bodySite C0..1CodeableConceptObserved body part
Binding: Body Site . (preferred)
au-core-obs-04: If a coded body site is provided, at least one code shall be from SNOMED CT
... method 0..1CodeableConceptHow it was done
Binding: ObservationMethods (example): Methods for simple observations.

... specimen 0..1Reference(Specimen)Specimen used for this observation
... device 0..1Reference(Device | DeviceMetric)(Measurement) Device
... referenceRange C0..*BackboneElementProvides guide for interpretation
obs-3: Must have at least a low or a high or text
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... low C0..1SimpleQuantityLow Range, if relevant
.... high C0..1SimpleQuantityHigh Range, if relevant
.... type 0..1CodeableConceptReference range qualifier
Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.

.... appliesTo 0..*CodeableConceptReference range population
Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.


.... age 0..1RangeApplicable age range, if relevant
.... text 0..1stringText based reference range in an observation
... hasMember Σ0..*Reference(QuestionnaireResponse | MolecularSequence | Vital Signs Profile)Used when reporting vital signs panel components
... derivedFrom Σ0..*Reference(DocumentReference | ImagingStudy | Media | QuestionnaireResponse | MolecularSequence | Vital Signs Profile)Related measurements the observation is made from
... component SΣC0..*BackboneElementUsed when reporting systolic and diastolic blood pressure.
vs-3: If there is no a value a data absent reason must be present
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... code SΣ1..1CodeableConceptType of component observation (code / type)
Binding: VitalSigns (extensible): This identifies the vital sign result type.

.... value[x] SΣC0..1Vital Sign Value recorded with UCUM
Binding: VitalSignsUnits (required): Common UCUM units for recording Vital Signs.

..... valueQuantityQuantity
..... valueCodeableConceptCodeableConcept
..... valueStringstring
..... valueBooleanboolean
..... valueIntegerinteger
..... valueRangeRange
..... valueRatioRatio
..... valueSampledDataSampledData
..... valueTimetime
..... valueDateTimedateTime
..... valuePeriodPeriod
.... dataAbsentReason SC0..1CodeableConceptWhy the component result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

.... interpretation 0..*CodeableConceptHigh, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


.... referenceRange 0..*See referenceRange (Observation)Provides guide for interpretation of component result

doco Documentation for this format

Terminology Bindings

PathConformanceValueSet / CodeURI
Observation.languagepreferredCommonLanguages
Additional Bindings Purpose
AllLanguages Max Binding
http://hl7.org/fhir/ValueSet/languages
from the FHIR Standard
Observation.statusrequiredFixed Value: final
http://hl7.org/fhir/ValueSet/observation-status|4.0.1
from the FHIR Standard
Observation.categorypreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.category:VSCatpreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.codeextensibleVitalSigns
http://hl7.org/fhir/ValueSet/observation-vitalsignresult
from the FHIR Standard
Observation.value[x]:valueQuantity.comparatorrequiredQuantityComparator
http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1
from the FHIR Standard
Observation.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard
Observation.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
from the FHIR Standard
Observation.bodySitepreferredBodySite .
https://healthterminologies.gov.au/fhir/ValueSet/body-site-1
Observation.methodexampleObservationMethods
http://hl7.org/fhir/ValueSet/observation-methods
from the FHIR Standard
Observation.referenceRange.typepreferredObservationReferenceRangeMeaningCodes
http://hl7.org/fhir/ValueSet/referencerange-meaning
from the FHIR Standard
Observation.referenceRange.appliesToexampleObservationReferenceRangeAppliesToCodes
http://hl7.org/fhir/ValueSet/referencerange-appliesto
from the FHIR Standard
Observation.component.codeextensibleVitalSigns
http://hl7.org/fhir/ValueSet/observation-vitalsignresult
from the FHIR Standard
Observation.component.value[x]requiredVitalSignsUnits
http://hl7.org/fhir/ValueSet/ucum-vitals-common|4.0.1
from the FHIR Standard
Observation.component.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard
Observation.component.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
from the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
au-core-obs-01errorObservation.effective[x]Date shall be at least to day
: $this is DateTime implies $this.toString().length() >= 10
au-core-obs-04errorObservation.bodySiteIf a coded body site is provided, at least one code shall be from SNOMED CT
: coding.exists() implies coding.where(system='http://snomed.info/sct').exists()
dom-2errorObservationIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3errorObservationIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4errorObservationIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5errorObservationIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6best practiceObservationA resource should have narrative for robust management
: text.`div`.exists()
ele-1error**ALL** elementsAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1error**ALL** extensionsMust have either extensions or value[x], not both
: extension.exists() != value.exists()
obs-3errorObservation.referenceRangeMust have at least a low or a high or text
: low.exists() or high.exists() or text.exists()
obs-6errorObservationdataAbsentReason SHALL only be present if Observation.value[x] is not present
: dataAbsentReason.empty() or value.empty()
obs-7errorObservationIf Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
: value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()
vs-1errorObservation.effective[x]if Observation.effective[x] is dateTime and has a value then that value shall be precise to the day
: $this is dateTime implies $this.toString().length() >= 10
vs-2errorObservationIf there is no component or hasMember element then either a value[x] or a data absent reason must be present.
: (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
vs-3errorObservation.componentIf there is no a value a data absent reason must be present
: value.exists() or dataAbsentReason.exists()

Differential View

This structure is derived from observation-heartrate

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation 0..*observation-heartrateHeart rate
... status 1..1coderegistered | preliminary | final | amended +
Fixed Value: final
... code
.... coding 2..*CodingCode defined by a terminology system
.... coding:snomedHeartRateCode 1..1CodingSNOMED CT Heart Rate
..... system 1..1uriIdentity of the terminology system
Fixed Value: http://snomed.info/sct
..... code 1..1codeSymbol in syntax defined by the system
Fixed Value: 364075005
... subject 1..1Reference(AU Core Patient)Who and/or what the observation is about
... effective[x] C1..1dateTimeDate, and optionally time, the observation was performed
au-core-obs-01: Date shall be at least to day
... performer S0..*Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | RelatedPerson)Who is responsible for the observation
... value[x] 0..1QuantityHeart rate
... dataAbsentReason 0..1CodeableConceptWhy the result is missing
... bodySite C0..1CodeableConceptObserved body part
Binding: Body Site . (preferred)
au-core-obs-04: If a coded body site is provided, at least one code shall be from SNOMED CT

doco Documentation for this format

Terminology Bindings (Differential)

PathConformanceValueSetURI
Observation.bodySitepreferredBodySite .
https://healthterminologies.gov.au/fhir/ValueSet/body-site-1

Constraints

IdGradePath(s)DetailsRequirements
au-core-obs-01errorObservation.effective[x]Date shall be at least to day
: $this is DateTime implies $this.toString().length() >= 10
au-core-obs-04errorObservation.bodySiteIf a coded body site is provided, at least one code shall be from SNOMED CT
: coding.exists() implies coding.where(system='http://snomed.info/sct').exists()

Key Elements View

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation C0..*observation-heartrateHeart rate
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
vs-2: If there is no component or hasMember element then either a value[x] or a data absent reason must be present.
... implicitRules ?!Σ0..1uriA set of rules under which this content was created
... modifierExtension ?!0..*ExtensionExtensions that cannot be ignored
... status ?!SΣ1..1coderegistered | preliminary | final | amended +
Binding: ObservationStatus (required)
Fixed Value: final
.... category:VSCat S1..1CodeableConceptClassification of type of observation
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


..... coding SΣ1..*CodingCode defined by a terminology system
...... system SΣ1..1uriIdentity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
...... code SΣ1..1codeSymbol in syntax defined by the system
Fixed Value: vital-signs
... code SΣ1..1CodeableConceptHeart Rate
Binding: VitalSigns (extensible): This identifies the vital sign result type.

.... Slices for coding Σ2..*CodingCode defined by a terminology system
Slice: Unordered, Open by value:code, value:system
..... coding:HeartRateCode Σ1..1CodingCode defined by a terminology system
...... system Σ1..1uriIdentity of the terminology system
Fixed Value: http://loinc.org
...... code Σ1..1codeSymbol in syntax defined by the system
Fixed Value: 8867-4
..... coding:snomedHeartRateCode Σ1..1CodingSNOMED CT Heart Rate
...... system Σ1..1uriIdentity of the terminology system
Fixed Value: http://snomed.info/sct
...... code Σ1..1codeSymbol in syntax defined by the system
Fixed Value: 364075005
... subject SΣ1..1Reference(AU Core Patient)Who and/or what the observation is about
... encounter SΣ0..1Reference(AU Core Encounter)Healthcare event during which this observation is made
... effective[x] SΣC1..1dateTimeDate, and optionally time, the observation was performed
vs-1: if Observation.effective[x] is dateTime and has a value then that value shall be precise to the day
au-core-obs-01: Date shall be at least to day
... performer SΣ0..*Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | RelatedPerson)Who is responsible for the observation
... Slices for value[x] SΣC0..1QuantityHeart rate
Slice: Unordered, Closed by type:$this
.... value[x]:valueQuantity SΣC0..1QuantityVital Signs value are recorded using the Quantity data type. For supporting observations such as Cuff size could use other datatypes such as CodeableConcept.
..... value SΣ1..1decimalNumerical value (with implicit precision)
..... comparator ?!Σ0..1code< | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.

..... unit SΣ1..1stringUnit representation
..... system SΣC1..1uriSystem that defines coded unit form
Fixed Value: http://unitsofmeasure.org
..... code SΣ1..1codeCoded responses from the common UCUM units for vital signs value set.
Fixed Value: /min
... dataAbsentReason SC0..1CodeableConceptWhy the result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

... bodySite C0..1CodeableConceptObserved body part
Binding: Body Site . (preferred)
au-core-obs-04: If a coded body site is provided, at least one code shall be from SNOMED CT
... component SΣC0..*BackboneElementUsed when reporting systolic and diastolic blood pressure.
vs-3: If there is no a value a data absent reason must be present
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... code SΣ1..1CodeableConceptType of component observation (code / type)
Binding: VitalSigns (extensible): This identifies the vital sign result type.

.... value[x] SΣC0..1Vital Sign Value recorded with UCUM
Binding: VitalSignsUnits (required): Common UCUM units for recording Vital Signs.

..... valueQuantityQuantity
..... valueCodeableConceptCodeableConcept
..... valueStringstring
..... valueBooleanboolean
..... valueIntegerinteger
..... valueRangeRange
..... valueRatioRatio
..... valueSampledDataSampledData
..... valueTimetime
..... valueDateTimedateTime
..... valuePeriodPeriod
.... dataAbsentReason SC0..1CodeableConceptWhy the component result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.


doco Documentation for this format

Terminology Bindings

PathConformanceValueSet / CodeURI
Observation.statusrequiredFixed Value: final
http://hl7.org/fhir/ValueSet/observation-status|4.0.1
from the FHIR Standard
Observation.categorypreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.category:VSCatpreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.codeextensibleVitalSigns
http://hl7.org/fhir/ValueSet/observation-vitalsignresult
from the FHIR Standard
Observation.value[x]:valueQuantity.comparatorrequiredQuantityComparator
http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1
from the FHIR Standard
Observation.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard
Observation.bodySitepreferredBodySite .
https://healthterminologies.gov.au/fhir/ValueSet/body-site-1
Observation.component.codeextensibleVitalSigns
http://hl7.org/fhir/ValueSet/observation-vitalsignresult
from the FHIR Standard
Observation.component.value[x]requiredVitalSignsUnits
http://hl7.org/fhir/ValueSet/ucum-vitals-common|4.0.1
from the FHIR Standard
Observation.component.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
au-core-obs-01errorObservation.effective[x]Date shall be at least to day
: $this is DateTime implies $this.toString().length() >= 10
au-core-obs-04errorObservation.bodySiteIf a coded body site is provided, at least one code shall be from SNOMED CT
: coding.exists() implies coding.where(system='http://snomed.info/sct').exists()
dom-2errorObservationIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3errorObservationIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4errorObservationIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5errorObservationIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6best practiceObservationA resource should have narrative for robust management
: text.`div`.exists()
ele-1error**ALL** elementsAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1error**ALL** extensionsMust have either extensions or value[x], not both
: extension.exists() != value.exists()
obs-6errorObservationdataAbsentReason SHALL only be present if Observation.value[x] is not present
: dataAbsentReason.empty() or value.empty()
obs-7errorObservationIf Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
: value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()
vs-1errorObservation.effective[x]if Observation.effective[x] is dateTime and has a value then that value shall be precise to the day
: $this is dateTime implies $this.toString().length() >= 10
vs-2errorObservationIf there is no component or hasMember element then either a value[x] or a data absent reason must be present.
: (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
vs-3errorObservation.componentIf there is no a value a data absent reason must be present
: value.exists() or dataAbsentReason.exists()

Snapshot View

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation C0..*observation-heartrateHeart rate
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
vs-2: If there is no component or hasMember element then either a value[x] or a data absent reason must be present.
... id Σ0..1idLogical id of this artifact
... meta Σ0..1MetaMetadata about the resource
... implicitRules ?!Σ0..1uriA set of rules under which this content was created
... language 0..1codeLanguage of the resource content
Binding: CommonLanguages (preferred): A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
... text 0..1NarrativeText summary of the resource, for human interpretation
... contained 0..*ResourceContained, inline Resources
... extension 0..*ExtensionAdditional content defined by implementations
... modifierExtension ?!0..*ExtensionExtensions that cannot be ignored
... identifier Σ0..*IdentifierBusiness Identifier for observation
... basedOn Σ0..*Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest)Fulfills plan, proposal or order
... partOf Σ0..*Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy)Part of referenced event
... status ?!SΣ1..1coderegistered | preliminary | final | amended +
Binding: ObservationStatus (required)
Fixed Value: final
... Slices for category S1..*CodeableConceptClassification of type of observation
Slice: Unordered, Open by value:coding.code, value:coding.system
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


.... category:VSCat S1..1CodeableConceptClassification of type of observation
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


..... id 0..1stringUnique id for inter-element referencing
..... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
..... coding SΣ1..*CodingCode defined by a terminology system
...... id 0..1stringUnique id for inter-element referencing
...... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
...... system SΣ1..1uriIdentity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
...... version Σ0..1stringVersion of the system - if relevant
...... code SΣ1..1codeSymbol in syntax defined by the system
Fixed Value: vital-signs
...... display Σ0..1stringRepresentation defined by the system
...... userSelected Σ0..1booleanIf this coding was chosen directly by the user
..... text Σ0..1stringPlain text representation of the concept
... code SΣ1..1CodeableConceptHeart Rate
Binding: VitalSigns (extensible): This identifies the vital sign result type.

.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
.... Slices for coding Σ2..*CodingCode defined by a terminology system
Slice: Unordered, Open by value:code, value:system
..... coding:HeartRateCode Σ1..1CodingCode defined by a terminology system
...... id 0..1stringUnique id for inter-element referencing
...... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
...... system Σ1..1uriIdentity of the terminology system
Fixed Value: http://loinc.org
...... version Σ0..1stringVersion of the system - if relevant
...... code Σ1..1codeSymbol in syntax defined by the system
Fixed Value: 8867-4
...... display Σ0..1stringRepresentation defined by the system
...... userSelected Σ0..1booleanIf this coding was chosen directly by the user
..... coding:snomedHeartRateCode Σ1..1CodingSNOMED CT Heart Rate
...... id 0..1stringUnique id for inter-element referencing
...... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
...... system Σ1..1uriIdentity of the terminology system
Fixed Value: http://snomed.info/sct
...... version Σ0..1stringVersion of the system - if relevant
...... code Σ1..1codeSymbol in syntax defined by the system
Fixed Value: 364075005
...... display Σ0..1stringRepresentation defined by the system
...... userSelected Σ0..1booleanIf this coding was chosen directly by the user
.... text Σ0..1stringPlain text representation of the concept
... subject SΣ1..1Reference(AU Core Patient)Who and/or what the observation is about
... focus Σ0..*Reference(Resource)What the observation is about, when it is not about the subject of record
... encounter SΣ0..1Reference(AU Core Encounter)Healthcare event during which this observation is made
... effective[x] SΣC1..1dateTimeDate, and optionally time, the observation was performed
vs-1: if Observation.effective[x] is dateTime and has a value then that value shall be precise to the day
au-core-obs-01: Date shall be at least to day
... issued Σ0..1instantDate/Time this version was made available
... performer SΣ0..*Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | RelatedPerson)Who is responsible for the observation
... Slices for value[x] SΣC0..1QuantityHeart rate
Slice: Unordered, Closed by type:$this
.... value[x]:valueQuantity SΣC0..1QuantityVital Signs value are recorded using the Quantity data type. For supporting observations such as Cuff size could use other datatypes such as CodeableConcept.
..... id 0..1stringUnique id for inter-element referencing
..... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
..... value SΣ1..1decimalNumerical value (with implicit precision)
..... comparator ?!Σ0..1code< | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.

..... unit SΣ1..1stringUnit representation
..... system SΣC1..1uriSystem that defines coded unit form
Fixed Value: http://unitsofmeasure.org
..... code SΣ1..1codeCoded responses from the common UCUM units for vital signs value set.
Fixed Value: /min
... dataAbsentReason SC0..1CodeableConceptWhy the result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

... interpretation 0..*CodeableConceptHigh, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


... note 0..*AnnotationComments about the observation
... bodySite C0..1CodeableConceptObserved body part
Binding: Body Site . (preferred)
au-core-obs-04: If a coded body site is provided, at least one code shall be from SNOMED CT
... method 0..1CodeableConceptHow it was done
Binding: ObservationMethods (example): Methods for simple observations.

... specimen 0..1Reference(Specimen)Specimen used for this observation
... device 0..1Reference(Device | DeviceMetric)(Measurement) Device
... referenceRange C0..*BackboneElementProvides guide for interpretation
obs-3: Must have at least a low or a high or text
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... low C0..1SimpleQuantityLow Range, if relevant
.... high C0..1SimpleQuantityHigh Range, if relevant
.... type 0..1CodeableConceptReference range qualifier
Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.

.... appliesTo 0..*CodeableConceptReference range population
Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.


.... age 0..1RangeApplicable age range, if relevant
.... text 0..1stringText based reference range in an observation
... hasMember Σ0..*Reference(QuestionnaireResponse | MolecularSequence | Vital Signs Profile)Used when reporting vital signs panel components
... derivedFrom Σ0..*Reference(DocumentReference | ImagingStudy | Media | QuestionnaireResponse | MolecularSequence | Vital Signs Profile)Related measurements the observation is made from
... component SΣC0..*BackboneElementUsed when reporting systolic and diastolic blood pressure.
vs-3: If there is no a value a data absent reason must be present
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... code SΣ1..1CodeableConceptType of component observation (code / type)
Binding: VitalSigns (extensible): This identifies the vital sign result type.

.... value[x] SΣC0..1Vital Sign Value recorded with UCUM
Binding: VitalSignsUnits (required): Common UCUM units for recording Vital Signs.

..... valueQuantityQuantity
..... valueCodeableConceptCodeableConcept
..... valueStringstring
..... valueBooleanboolean
..... valueIntegerinteger
..... valueRangeRange
..... valueRatioRatio
..... valueSampledDataSampledData
..... valueTimetime
..... valueDateTimedateTime
..... valuePeriodPeriod
.... dataAbsentReason SC0..1CodeableConceptWhy the component result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

.... interpretation 0..*CodeableConceptHigh, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


.... referenceRange 0..*See referenceRange (Observation)Provides guide for interpretation of component result

doco Documentation for this format

Terminology Bindings

PathConformanceValueSet / CodeURI
Observation.languagepreferredCommonLanguages
Additional Bindings Purpose
AllLanguages Max Binding
http://hl7.org/fhir/ValueSet/languages
from the FHIR Standard
Observation.statusrequiredFixed Value: final
http://hl7.org/fhir/ValueSet/observation-status|4.0.1
from the FHIR Standard
Observation.categorypreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.category:VSCatpreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.codeextensibleVitalSigns
http://hl7.org/fhir/ValueSet/observation-vitalsignresult
from the FHIR Standard
Observation.value[x]:valueQuantity.comparatorrequiredQuantityComparator
http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1
from the FHIR Standard
Observation.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard
Observation.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
from the FHIR Standard
Observation.bodySitepreferredBodySite .
https://healthterminologies.gov.au/fhir/ValueSet/body-site-1
Observation.methodexampleObservationMethods
http://hl7.org/fhir/ValueSet/observation-methods
from the FHIR Standard
Observation.referenceRange.typepreferredObservationReferenceRangeMeaningCodes
http://hl7.org/fhir/ValueSet/referencerange-meaning
from the FHIR Standard
Observation.referenceRange.appliesToexampleObservationReferenceRangeAppliesToCodes
http://hl7.org/fhir/ValueSet/referencerange-appliesto
from the FHIR Standard
Observation.component.codeextensibleVitalSigns
http://hl7.org/fhir/ValueSet/observation-vitalsignresult
from the FHIR Standard
Observation.component.value[x]requiredVitalSignsUnits
http://hl7.org/fhir/ValueSet/ucum-vitals-common|4.0.1
from the FHIR Standard
Observation.component.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard
Observation.component.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
from the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
au-core-obs-01errorObservation.effective[x]Date shall be at least to day
: $this is DateTime implies $this.toString().length() >= 10
au-core-obs-04errorObservation.bodySiteIf a coded body site is provided, at least one code shall be from SNOMED CT
: coding.exists() implies coding.where(system='http://snomed.info/sct').exists()
dom-2errorObservationIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3errorObservationIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4errorObservationIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5errorObservationIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6best practiceObservationA resource should have narrative for robust management
: text.`div`.exists()
ele-1error**ALL** elementsAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1error**ALL** extensionsMust have either extensions or value[x], not both
: extension.exists() != value.exists()
obs-3errorObservation.referenceRangeMust have at least a low or a high or text
: low.exists() or high.exists() or text.exists()
obs-6errorObservationdataAbsentReason SHALL only be present if Observation.value[x] is not present
: dataAbsentReason.empty() or value.empty()
obs-7errorObservationIf Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
: value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()
vs-1errorObservation.effective[x]if Observation.effective[x] is dateTime and has a value then that value shall be precise to the day
: $this is dateTime implies $this.toString().length() >= 10
vs-2errorObservationIf there is no component or hasMember element then either a value[x] or a data absent reason must be present.
: (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
vs-3errorObservation.componentIf there is no a value a data absent reason must be present
: value.exists() or dataAbsentReason.exists()

 

Other representations of profile: CSV, Excel, Schematron

Notes:

Below is an overview of the mandatory and optional search parameters and combined search parameters. FHIR search operations and the syntax used to describe the interactions is described here.

Any search parameter defined in FHIR may be ‘allowed’ by the system unless explicitly marked as “SHALL NOT”. A few items are marked as MAY in this implementation guide to highlight their potential relevance.

Parameter(s) Conformance Type(s) Requirements (when used alone or in combination)
patient SHALL reference The client SHALL provide at least an id value and MAY provide both the Type and id values. The server SHALL support both.
patient+category SHALL reference+token
patient+category+date SHALL reference+token+date
patient+code SHALL reference+token
patient+category+status SHOULD reference+token+token
patient+code+date SHOULD reference+token+date
patient.identifier SHOULD reference.token The client SHALL provide both the system and code values. The server SHALL support both. The client SHOULD support search using IHI, Medicare Number, and DVA Number identifiers as defined in the AU Core Patient profile. The server SHOULD support search using the using IHI, Medicare Number, and DVA Number identifiers as defined in the AU Core Patient profile.
category MAY token The client SHALL provide at least a code value and MAY provide both the system and code values. The server SHALL support both. The client SHALL support search using the 'vital-signs' category defined in each profile. The server SHALL support search using the 'vital-signs' category defined in each profile.
code MAY token The client SHALL provide at least a code value and MAY provide both the system and code values. The server SHALL support both. The client SHALL support search using the LOINC codes defined in each profile. The server SHALL support search using the LOINC codes defined in each profile.
date MAY date A client SHALL provide a value precise to the second + time offset. A server SHALL support a value precise to the second + time offset.
status MAY token The client SHALL provide at least a code value and MAY provide both the system and code values. The server SHALL support both.

Mandatory Search Parameters:

The following search parameters and search parameter combinations SHALL be supported:

  1. SHALL support searching using the patient search parameter:
    • SHALL support these _revinclude parameters: Provenance:target
    • SHOULD support chained searching of patient canonical identifier patient.identifier (e.g. patient.identifier=[system|][code])

    GET [base]/Observation?patient={Type/}[id] or optionally GET [base]/Observation?patient.identifier=[system|][code]

    Example:

    1. GET [base]/Observation?patient=5678
    2. GET [base]/Observation?patient.identifier=http://ns.electronichealth.net.au/id/medicare-number|32788511952
    3. GET [base]/Observation?patient.identifier=http://ns.electronichealth.net.au/id/hi/ihi/1.0|8003608833357361

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient (how to search by reference and how to search by token)

  2. SHALL support searching using the combination of the patient and category search parameters:
    • SHOULD support chained searching of patient canonical identifier patient.identifier (e.g. patient.identifier=[system|][code])

    GET [base]/Observation?patient={Type/}[id]&category=vital-signs

    Example:

    1. GET [base]/Observation?patient=5678&category=vital-signs

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and category (how to search by reference and how to search by token)

  3. SHALL support searching using the combination of the patient and category and date search parameters:
    • SHOULD support chained searching of patient canonical identifier patient.identifier (e.g. patient.identifier=[system|][code])
    • SHALL support these date comparators: gt,lt,ge,le
    • SHOULD support multipleAnd search on date (e.g.date=[date]&date=[date]]&...)

    GET [base]/Observation?patient={Type/}[id]&category=vital-signs&date={gt|lt|ge|le}[date]{&date={gt|lt|ge|le}[date]&...}

    Example:

    1. GET [base]/Observation?patient=5678&category=vital-signs&date=ge2020-01-01T00:00:00Z

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and date and a category code = vital-signs (how to search by reference and how to search by token and how to search by date)

  4. SHALL support searching using the combination of the patient and code search parameters:
    • SHOULD support chained searching of patient canonical identifier patient.identifier (e.g. patient.identifier=[system|][code])
    • SHOULD support multipleOr search on code (e.g.code={system|}[code],{system|}[code],...)

    GET [base]/Observation?patient={Type/}[id]&code={system|}[code]{,{system|}[code],...}

    Example:

    1. GET [base]/Observation?patient=5678&code=http://snomed.info/sct|364075005,http://loinc.org|8867-4,http://loinc.org|85354-9

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and observation code(s). The Observation code parameter searches Observation.code only. (how to search by reference and how to search by token)

Optional Search Parameters:

The following search parameters and search parameter combinations SHOULD be supported:

  1. SHOULD support searching using the combination of the patient and category and status search parameters:
    • SHOULD support chained searching of patient canonical identifier patient.identifier (e.g. patient.identifier=[system|][code])
    • SHALL support multipleOr search on status (e.g.status={system|}[code],{system|}[code],...)

    GET [base]/Observation?patient={Type/}[id]&category=vital-signs&status={system|}[code]{,{system|}[code],...}

    Example:

    1. GET [base]/Observation?patient=5678&category=vital-signs&status=final
    2. GET [base]/Observation?patient=5678&category=vital-signs&

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and category and status (how to search by reference and how to search by token)

  2. SHOULD support searching using the combination of the patient and code and date search parameters:
    • SHOULD support chained searching of patient canonical identifier patient.identifier (e.g. patient.identifier=[system|][code]
    • SHOULD support multipleOr search on code (e.g.code={system|}[code],{system|}[code],...)
    • SHALL support these date comparators: gt,lt,ge,le
    • SHOULD support multipleAnd search on date (e.g.date=[date]&date=[date]]&...)

    GET [base]/Observation?patient={Type/}[id]&code={system|}[code]{,{system|}[code],...}&date={gt|lt|ge|le}[date]{&date={gt|lt|ge|le}[date]&...}

    Example:

    1. GET [base]/Observation?patient=5678&code=http://snomed.info/sct|364075005,http://loinc.org|8867-4,http://loinc.org|85354-9&date=ge2020-01-01T00:00:00Z
    2. GET [base]/Observation?patient.identifier=http://example.org/fhir/mrn|12345&code=http://snomed.info/sct|364075005,http://loinc.org|8867-4,http://loinc.org|85354-9&date=ge2020-01-01T00:00:00Z

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and date and observation code(s) (how to search by reference and how to search by token and how to search by date)