AU Core Implementation Guide
0.4.0-preview - Preview Australia flag

This page is part of the AU Core (v0.4.0-preview: QA Preview) based on FHIR (HL7® FHIR® Standard) R4. . For a full list of available versions, see the Directory of published versions

Resource Profile: AU Core Pathology Result Observation

Official URL: http://hl7.org.au/fhir/core/StructureDefinition/au-core-diagnosticresult-path Version: 0.4.0-preview
Standards status: Draft Maturity Level: 1 Computable Name: AUCorePathologyResult

Copyright/Legal: Used by permission of HL7 International, all rights reserved Creative Commons License. HL7 Australia© 2022+; Licensed Under Creative Commons No Rights Reserved.

This profile sets minimum expectations for an Observation resource to record, search, and fetch pathology results associated with a patient. It is based on the AU Base Pathology Result profile and identifies the additional mandatory core elements, extensions, vocabularies and value sets that SHALL be present in the Observation when conforming to this profile. It provides the floor for standards development for specific uses cases in an Australian context.

Usage scenarios

The following are supported usage scenarios for this profile:

  • Query for pathology results for a patient
  • Query for category of pathology results (e.g. all chemistry)
  • Record or update pathology results belonging to a patient

Comparison with other national and international IGs

A resource conforming to this profile is conformant to:

Conformance in reverse is not guaranteed, i.e. a resource conforming to International Patient Access, International Patient Summary, or US Core MAY NOT conform to AU Core.

Profile specific implementation guidance

  • Observation.category provides an efficient way of supporting system interactions, e.g. restricting searches. Implementers need to understand that data categorisation is somewhat subjective. The categorisation applied by the source may not align with a receiver’s expectations.
  • The observations MAY have additional codes that translate or map to the Observation code or category codes. For example:
    • providing a local code
    • providing a more specific code
  • The use of coding can vary significantly across systems, requesters need to understand that they may encounter codes they do not recognise and be prepared to handle those resources appropriately. Responders SHOULD populate Observation.code.text and/or Observation.code.coding.display so that the requester can at least display the observation even if the requester does not recognise the code supplied.
  • The Observation resource can represent a result using a single value in Observation.value, or can represent a set of results using either Observation.component.value or Observation.hasMember.
    • Although all are marked as Must Support, responders are not required to support all choices, but they SHALL support at least one of these elements
    • A requester SHALL support all elements (Observation.value, Observation.component.value, Observation.hasMember)
  • Observation.identifier may contain the same identifier as in the order or report connecting the resources that are related to a single request fulfilment workflow
  • Unless the specimen is explicitly clear in Observation.code, specimen information SHOULD be made available in Observation.specimen.
  • Source system identifiers that identify the business process (order ids and reporting identifiers) MAY be included as AU Local Order Identifier and AU Local Report Identifier to support workflow and deduplication of Observation resources.
    • See guidance on the construction of an identifier on the relevant Identifier profile page and the section on Business Identifiers in AU Base.

Usage:

Formal Views of Profile Content

Description of Profiles, Differentials, Snapshots and how the different presentations work.

This structure is derived from AUBasePathologyResult

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation C 0..* AUBasePathologyResult A pathology test result in an Australian healthcare context
au-core-obs-05: If there is no component or hasMember element then at least value or data absent reason shall be present
... identifier SO 0..* Identifier Business Identifier for observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... status SO 1..1 code preliminary | final | amended +
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... category SO 1..* CodeableConcept Classification of the service requested as laboratory + more specific discipline where available
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... subject SO 1..1 Reference(AU Core Patient) Who and/or what the observation is about
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... effective[x] SOC 1..1 dateTime, Period Time of specimen collection
au-core-obs-01: Date shall be at least to day
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... performer SO 0..* Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | AU Base Related Person) Who is responsible for the observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... value[x] SOC 0..1 Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period Actual result
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... dataAbsentReason SOC 0..1 CodeableConcept Why the result is missing
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... interpretation SO 0..* CodeableConcept High, low, normal, etc.
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... note SO 0..* Annotation Comments about the observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... method SO 0..1 CodeableConcept How it was done
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... specimen SO 0..1 Reference(AU Base Specimen) Specimen used for this observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... reference O 1..1 string Literal reference, Relative, internal or absolute URL
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... referenceRange SO 0..* BackboneElement Provides guide for interpretation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... low SO 0..1 SimpleQuantity Low Range, if relevant
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... high SO 0..1 SimpleQuantity High Range, if relevant
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... type SO 0..1 CodeableConcept Reference range qualifier
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... text SO 0..1 string Text based reference range in an observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... hasMember SO 0..* Reference(AU Core Pathology Result Observation) Individual observations in a group, study, or panel
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... reference O 1..1 string Literal reference, Relative, internal or absolute URL
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... component SOC 0..* BackboneElement Individual tests in a group or panel
au-core-obs-06: The component shall at least have a value or a data absent reason
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... code SO 1..1 CodeableConcept Individual pathology test
Binding: RCPA SPIA Pathology Reporting . (extensible)
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... value[x] SOC 0..1 Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period Actual component result
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... dataAbsentReason SOC 0..1 CodeableConcept Why the component result is missing
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester

doco Documentation for this format

Terminology Bindings (Differential)

PathConformanceValueSetURI
Observation.codeextensibleRCPASPIAPathologyReporting .
https://healthterminologies.gov.au/fhir/ValueSet/spia-pathology-reporting-1
Observation.component.codeextensibleRCPASPIAPathologyReporting .
https://healthterminologies.gov.au/fhir/ValueSet/spia-pathology-reporting-1

Constraints

IdGradePath(s)DetailsRequirements
au-core-obs-01errorObservation.effective[x]Date shall be at least to day
: $this is DateTime implies $this.toString().length() >= 10
au-core-obs-05errorObservationIf there is no component or hasMember element then at least value or data absent reason shall be present
: (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
au-core-obs-06errorObservation.componentThe component shall at least have a value or a data absent reason
: value.exists() or dataAbsentReason.exists()
NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation C 0..* AUBasePathologyResult A pathology test result in an Australian healthcare context
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
inv-obs-0: A pathology result shall at least have value or data absent reason or a child observation with a value or data absent reason
au-core-obs-05: If there is no component or hasMember element then at least value or data absent reason shall be present
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... identifier SOΣ 0..* Identifier Business Identifier for observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... Slices for category SO 1..* CodeableConcept Classification of the service requested as laboratory + more specific discipline where available
Slice: Unordered, Open by value:coding.system, value:coding.code
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... category:lab 1..1 CodeableConcept Observation generated by laboratories
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


..... coding Σ 1..* Coding Code defined by a terminology system
...... system Σ 1..1 uri Identity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
...... code Σ 1..1 code Symbol in syntax defined by the system
Fixed Value: laboratory
.... category:specificDiscipline 0..* CodeableConcept Specific discipline of pathology
Binding: Pathology Diagnostic Service Category . (extensible)
... code SOΣ 1..1 CodeableConcept Pathology test or test group
Binding: RCPA SPIA Pathology Reporting . (extensible)
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... subject SOΣ 1..1 Reference(AU Core Patient) Who and/or what the observation is about
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... effective[x] SOΣC 1..1 Time of specimen collection
au-core-obs-01: Date shall be at least to day
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... effectiveDateTime dateTime
.... effectivePeriod Period
... performer SOΣ 0..* Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | AU Base Related Person) Who is responsible for the observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... value[x] SOΣC 0..1 Actual result
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... valueQuantity Quantity
.... valueCodeableConcept CodeableConcept
.... valueString string
.... valueBoolean boolean
.... valueInteger integer
.... valueRange Range
.... valueRatio Ratio
.... valueSampledData SampledData
.... valueTime time
.... valueDateTime dateTime
.... valuePeriod Period
... dataAbsentReason SOC 0..1 CodeableConcept Why the result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... interpretation SO 0..* CodeableConcept High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... note SO 0..* Annotation Comments about the observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... method SO 0..1 CodeableConcept How it was done
Binding: ObservationMethods (example): Methods for simple observations.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... specimen SO 0..1 Reference(AU Base Specimen) Specimen used for this observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... reference OΣC 1..1 string Literal reference, Relative, internal or absolute URL
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... referenceRange SOC 0..* BackboneElement Provides guide for interpretation
obs-3: Must have at least a low or a high or text
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... low SOC 0..1 SimpleQuantity Low Range, if relevant
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... high SOC 0..1 SimpleQuantity High Range, if relevant
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... type SO 0..1 CodeableConcept Reference range qualifier
Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... text SO 0..1 string Text based reference range in an observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... hasMember SOΣC 0..* Reference(AU Core Pathology Result Observation) Individual observations in a group, study, or panel
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... reference OΣC 1..1 string Literal reference, Relative, internal or absolute URL
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... component SOΣC 0..* BackboneElement Individual tests in a group or panel
au-core-obs-06: The component shall at least have a value or a data absent reason
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... code SOΣ 1..1 CodeableConcept Individual pathology test
Binding: RCPA SPIA Pathology Reporting . (extensible)
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... value[x] SOΣC 0..1 Actual component result
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
..... valueQuantity Quantity
..... valueCodeableConcept CodeableConcept
..... valueString string
..... valueBoolean boolean
..... valueInteger integer
..... valueRange Range
..... valueRatio Ratio
..... valueSampledData SampledData
..... valueTime time
..... valueDateTime dateTime
..... valuePeriod Period
.... dataAbsentReason SOC 0..1 CodeableConcept Why the component result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
Observation.statusrequiredObservationStatus
http://hl7.org/fhir/ValueSet/observation-status|4.0.1
from the FHIR Standard
Observation.categorypreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.category:labpreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.category:specificDisciplineextensiblePathologyDiagnosticServiceCategory .
https://healthterminologies.gov.au/fhir/ValueSet/pathology-diagnostic-service-category-1
Observation.codeextensibleRCPASPIAPathologyReporting .
https://healthterminologies.gov.au/fhir/ValueSet/spia-pathology-reporting-1
Observation.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard
Observation.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
from the FHIR Standard
Observation.methodexampleObservationMethods
http://hl7.org/fhir/ValueSet/observation-methods
from the FHIR Standard
Observation.referenceRange.typepreferredObservationReferenceRangeMeaningCodes
http://hl7.org/fhir/ValueSet/referencerange-meaning
from the FHIR Standard
Observation.component.codeextensibleRCPASPIAPathologyReporting .
https://healthterminologies.gov.au/fhir/ValueSet/spia-pathology-reporting-1
Observation.component.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
au-core-obs-01errorObservation.effective[x]Date shall be at least to day
: $this is DateTime implies $this.toString().length() >= 10
au-core-obs-05errorObservationIf there is no component or hasMember element then at least value or data absent reason shall be present
: (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
au-core-obs-06errorObservation.componentThe component shall at least have a value or a data absent reason
: value.exists() or dataAbsentReason.exists()
dom-2errorObservationIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3errorObservationIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4errorObservationIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5errorObservationIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6best practiceObservationA resource should have narrative for robust management
: text.`div`.exists()
ele-1error**ALL** elementsAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1error**ALL** extensionsMust have either extensions or value[x], not both
: extension.exists() != value.exists()
inv-obs-0errorObservationA pathology result shall at least have value or data absent reason or a child observation with a value or data absent reason
: value.exists() or dataAbsentReason.exists() or hasMember.exists() or component.value.exists() or component.dataAbsentReason.exists()
obs-3errorObservation.referenceRangeMust have at least a low or a high or text
: low.exists() or high.exists() or text.exists()
obs-6errorObservationdataAbsentReason SHALL only be present if Observation.value[x] is not present
: dataAbsentReason.empty() or value.empty()
obs-7errorObservationIf Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
: value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()
NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation C 0..* AUBasePathologyResult A pathology test result in an Australian healthcare context
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
inv-obs-0: A pathology result shall at least have value or data absent reason or a child observation with a value or data absent reason
au-core-obs-05: If there is no component or hasMember element then at least value or data absent reason shall be present
... id Σ 0..1 id Logical id of this artifact
... meta Σ 0..1 Meta Metadata about the resource
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... language 0..1 code Language of the resource content
Binding: CommonLanguages (preferred): A human language.

Additional BindingsPurpose
AllLanguages Max Binding
... text 0..1 Narrative Text summary of the resource, for human interpretation
... contained 0..* Resource Contained, inline Resources
... extension 0..* Extension Additional content defined by implementations
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... identifier SOΣ 0..* Identifier Business Identifier for observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... basedOn Σ 0..* Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest) Fulfills plan, proposal or order
... partOf Σ 0..* Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy) Part of referenced event
... status ?!SOΣ 1..1 code preliminary | final | amended +
Binding: ObservationStatus (required): Codes providing the status of an observation.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... Slices for category SO 1..* CodeableConcept Classification of the service requested as laboratory + more specific discipline where available
Slice: Unordered, Open by value:coding.system, value:coding.code
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... category:lab 1..1 CodeableConcept Observation generated by laboratories
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... coding Σ 1..* Coding Code defined by a terminology system
...... id 0..1 string Unique id for inter-element referencing
...... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
...... system Σ 1..1 uri Identity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
...... version Σ 0..1 string Version of the system - if relevant
...... code Σ 1..1 code Symbol in syntax defined by the system
Fixed Value: laboratory
...... display Σ 0..1 string Representation defined by the system
...... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
..... text Σ 0..1 string Plain text representation of the concept
.... category:specificDiscipline 0..* CodeableConcept Specific discipline of pathology
Binding: Pathology Diagnostic Service Category . (extensible)
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... coding Σ 0..* Coding Code defined by a terminology system
...... id 0..1 string Unique id for inter-element referencing
...... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
...... system Σ 1..1 uri Identity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/v2-0074
...... version Σ 0..1 string Version of the system - if relevant
...... code Σ 0..1 code Symbol in syntax defined by the system
...... display Σ 0..1 string Representation defined by the system
...... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
..... text Σ 0..1 string Plain text representation of the concept
... code SOΣ 1..1 CodeableConcept Pathology test or test group
Binding: RCPA SPIA Pathology Reporting . (extensible)
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... subject SOΣ 1..1 Reference(AU Core Patient) Who and/or what the observation is about
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... focus Σ 0..* Reference(Resource) What the observation is about, when it is not about the subject of record
... encounter Σ 0..1 Reference(Encounter) Healthcare event during which this observation is made
... effective[x] SOΣC 1..1 Time of specimen collection
au-core-obs-01: Date shall be at least to day
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... effectiveDateTime dateTime
.... effectivePeriod Period
... issued Σ 0..1 instant Date/Time this version was made available
... performer SOΣ 0..* Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | AU Base Related Person) Who is responsible for the observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... value[x] SOΣC 0..1 Actual result
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... valueQuantity Quantity
.... valueCodeableConcept CodeableConcept
.... valueString string
.... valueBoolean boolean
.... valueInteger integer
.... valueRange Range
.... valueRatio Ratio
.... valueSampledData SampledData
.... valueTime time
.... valueDateTime dateTime
.... valuePeriod Period
... dataAbsentReason SOC 0..1 CodeableConcept Why the result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... interpretation SO 0..* CodeableConcept High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... note SO 0..* Annotation Comments about the observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... bodySite 0..1 CodeableConcept Observed body part
Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.

... method SO 0..1 CodeableConcept How it was done
Binding: ObservationMethods (example): Methods for simple observations.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... specimen SO 0..1 Reference(AU Base Specimen) Specimen used for this observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... reference OΣC 1..1 string Literal reference, Relative, internal or absolute URL
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... type Σ 0..1 uri Type the reference refers to (e.g. "Patient")
Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).

.... identifier Σ 0..1 Identifier Logical reference, when literal reference is not known
.... display Σ 0..1 string Text alternative for the resource
... device 0..1 Reference(Device | DeviceMetric) (Measurement) Device
... referenceRange SOC 0..* BackboneElement Provides guide for interpretation
obs-3: Must have at least a low or a high or text
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... low SOC 0..1 SimpleQuantity Low Range, if relevant
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... high SOC 0..1 SimpleQuantity High Range, if relevant
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... type SO 0..1 CodeableConcept Reference range qualifier
Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... appliesTo 0..* CodeableConcept Reference range population
Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.


.... age 0..1 Range Applicable age range, if relevant
.... text SO 0..1 string Text based reference range in an observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... hasMember SOΣC 0..* Reference(AU Core Pathology Result Observation) Individual observations in a group, study, or panel
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... reference OΣC 1..1 string Literal reference, Relative, internal or absolute URL
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... type Σ 0..1 uri Type the reference refers to (e.g. "Patient")
Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).

.... identifier Σ 0..1 Identifier Logical reference, when literal reference is not known
.... display Σ 0..1 string Text alternative for the resource
... derivedFrom Σ 0..* Reference(DocumentReference | ImagingStudy | Media | QuestionnaireResponse | Observation | MolecularSequence) Related measurements the observation is made from
... component SOΣC 0..* BackboneElement Individual tests in a group or panel
au-core-obs-06: The component shall at least have a value or a data absent reason
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... code SOΣ 1..1 CodeableConcept Individual pathology test
Binding: RCPA SPIA Pathology Reporting . (extensible)
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... value[x] SOΣC 0..1 Actual component result
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
..... valueQuantity Quantity
..... valueCodeableConcept CodeableConcept
..... valueString string
..... valueBoolean boolean
..... valueInteger integer
..... valueRange Range
..... valueRatio Ratio
..... valueSampledData SampledData
..... valueTime time
..... valueDateTime dateTime
..... valuePeriod Period
.... dataAbsentReason SOC 0..1 CodeableConcept Why the component result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... interpretation 0..* CodeableConcept High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


.... referenceRange 0..* See referenceRange (Observation) Provides guide for interpretation of component result

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
Observation.languagepreferredCommonLanguages
Additional Bindings Purpose
AllLanguages Max Binding
http://hl7.org/fhir/ValueSet/languages
from the FHIR Standard
Observation.statusrequiredObservationStatus
http://hl7.org/fhir/ValueSet/observation-status|4.0.1
from the FHIR Standard
Observation.categorypreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.category:labpreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.category:specificDisciplineextensiblePathologyDiagnosticServiceCategory .
https://healthterminologies.gov.au/fhir/ValueSet/pathology-diagnostic-service-category-1
Observation.codeextensibleRCPASPIAPathologyReporting .
https://healthterminologies.gov.au/fhir/ValueSet/spia-pathology-reporting-1
Observation.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard
Observation.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
from the FHIR Standard
Observation.bodySiteexampleSNOMEDCTBodyStructures
http://hl7.org/fhir/ValueSet/body-site
from the FHIR Standard
Observation.methodexampleObservationMethods
http://hl7.org/fhir/ValueSet/observation-methods
from the FHIR Standard
Observation.specimen.typeextensibleResourceType
http://hl7.org/fhir/ValueSet/resource-types
from the FHIR Standard
Observation.referenceRange.typepreferredObservationReferenceRangeMeaningCodes
http://hl7.org/fhir/ValueSet/referencerange-meaning
from the FHIR Standard
Observation.referenceRange.appliesToexampleObservationReferenceRangeAppliesToCodes
http://hl7.org/fhir/ValueSet/referencerange-appliesto
from the FHIR Standard
Observation.hasMember.typeextensibleResourceType
http://hl7.org/fhir/ValueSet/resource-types
from the FHIR Standard
Observation.component.codeextensibleRCPASPIAPathologyReporting .
https://healthterminologies.gov.au/fhir/ValueSet/spia-pathology-reporting-1
Observation.component.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard
Observation.component.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
from the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
au-core-obs-01errorObservation.effective[x]Date shall be at least to day
: $this is DateTime implies $this.toString().length() >= 10
au-core-obs-05errorObservationIf there is no component or hasMember element then at least value or data absent reason shall be present
: (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
au-core-obs-06errorObservation.componentThe component shall at least have a value or a data absent reason
: value.exists() or dataAbsentReason.exists()
dom-2errorObservationIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3errorObservationIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4errorObservationIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5errorObservationIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6best practiceObservationA resource should have narrative for robust management
: text.`div`.exists()
ele-1error**ALL** elementsAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1error**ALL** extensionsMust have either extensions or value[x], not both
: extension.exists() != value.exists()
inv-obs-0errorObservationA pathology result shall at least have value or data absent reason or a child observation with a value or data absent reason
: value.exists() or dataAbsentReason.exists() or hasMember.exists() or component.value.exists() or component.dataAbsentReason.exists()
obs-3errorObservation.referenceRangeMust have at least a low or a high or text
: low.exists() or high.exists() or text.exists()
obs-6errorObservationdataAbsentReason SHALL only be present if Observation.value[x] is not present
: dataAbsentReason.empty() or value.empty()
obs-7errorObservationIf Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
: value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

Differential View

This structure is derived from AUBasePathologyResult

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation C 0..* AUBasePathologyResult A pathology test result in an Australian healthcare context
au-core-obs-05: If there is no component or hasMember element then at least value or data absent reason shall be present
... identifier SO 0..* Identifier Business Identifier for observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... status SO 1..1 code preliminary | final | amended +
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... category SO 1..* CodeableConcept Classification of the service requested as laboratory + more specific discipline where available
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... subject SO 1..1 Reference(AU Core Patient) Who and/or what the observation is about
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... effective[x] SOC 1..1 dateTime, Period Time of specimen collection
au-core-obs-01: Date shall be at least to day
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... performer SO 0..* Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | AU Base Related Person) Who is responsible for the observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... value[x] SOC 0..1 Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period Actual result
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... dataAbsentReason SOC 0..1 CodeableConcept Why the result is missing
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... interpretation SO 0..* CodeableConcept High, low, normal, etc.
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... note SO 0..* Annotation Comments about the observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... method SO 0..1 CodeableConcept How it was done
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... specimen SO 0..1 Reference(AU Base Specimen) Specimen used for this observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... reference O 1..1 string Literal reference, Relative, internal or absolute URL
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... referenceRange SO 0..* BackboneElement Provides guide for interpretation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... low SO 0..1 SimpleQuantity Low Range, if relevant
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... high SO 0..1 SimpleQuantity High Range, if relevant
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... type SO 0..1 CodeableConcept Reference range qualifier
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... text SO 0..1 string Text based reference range in an observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... hasMember SO 0..* Reference(AU Core Pathology Result Observation) Individual observations in a group, study, or panel
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... reference O 1..1 string Literal reference, Relative, internal or absolute URL
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... component SOC 0..* BackboneElement Individual tests in a group or panel
au-core-obs-06: The component shall at least have a value or a data absent reason
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... code SO 1..1 CodeableConcept Individual pathology test
Binding: RCPA SPIA Pathology Reporting . (extensible)
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... value[x] SOC 0..1 Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period Actual component result
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... dataAbsentReason SOC 0..1 CodeableConcept Why the component result is missing
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester

doco Documentation for this format

Terminology Bindings (Differential)

PathConformanceValueSetURI
Observation.codeextensibleRCPASPIAPathologyReporting .
https://healthterminologies.gov.au/fhir/ValueSet/spia-pathology-reporting-1
Observation.component.codeextensibleRCPASPIAPathologyReporting .
https://healthterminologies.gov.au/fhir/ValueSet/spia-pathology-reporting-1

Constraints

IdGradePath(s)DetailsRequirements
au-core-obs-01errorObservation.effective[x]Date shall be at least to day
: $this is DateTime implies $this.toString().length() >= 10
au-core-obs-05errorObservationIf there is no component or hasMember element then at least value or data absent reason shall be present
: (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
au-core-obs-06errorObservation.componentThe component shall at least have a value or a data absent reason
: value.exists() or dataAbsentReason.exists()

Key Elements View

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation C 0..* AUBasePathologyResult A pathology test result in an Australian healthcare context
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
inv-obs-0: A pathology result shall at least have value or data absent reason or a child observation with a value or data absent reason
au-core-obs-05: If there is no component or hasMember element then at least value or data absent reason shall be present
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... identifier SOΣ 0..* Identifier Business Identifier for observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... Slices for category SO 1..* CodeableConcept Classification of the service requested as laboratory + more specific discipline where available
Slice: Unordered, Open by value:coding.system, value:coding.code
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... category:lab 1..1 CodeableConcept Observation generated by laboratories
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


..... coding Σ 1..* Coding Code defined by a terminology system
...... system Σ 1..1 uri Identity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
...... code Σ 1..1 code Symbol in syntax defined by the system
Fixed Value: laboratory
.... category:specificDiscipline 0..* CodeableConcept Specific discipline of pathology
Binding: Pathology Diagnostic Service Category . (extensible)
... code SOΣ 1..1 CodeableConcept Pathology test or test group
Binding: RCPA SPIA Pathology Reporting . (extensible)
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... subject SOΣ 1..1 Reference(AU Core Patient) Who and/or what the observation is about
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... effective[x] SOΣC 1..1 Time of specimen collection
au-core-obs-01: Date shall be at least to day
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... effectiveDateTime dateTime
.... effectivePeriod Period
... performer SOΣ 0..* Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | AU Base Related Person) Who is responsible for the observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... value[x] SOΣC 0..1 Actual result
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... valueQuantity Quantity
.... valueCodeableConcept CodeableConcept
.... valueString string
.... valueBoolean boolean
.... valueInteger integer
.... valueRange Range
.... valueRatio Ratio
.... valueSampledData SampledData
.... valueTime time
.... valueDateTime dateTime
.... valuePeriod Period
... dataAbsentReason SOC 0..1 CodeableConcept Why the result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... interpretation SO 0..* CodeableConcept High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... note SO 0..* Annotation Comments about the observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... method SO 0..1 CodeableConcept How it was done
Binding: ObservationMethods (example): Methods for simple observations.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... specimen SO 0..1 Reference(AU Base Specimen) Specimen used for this observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... reference OΣC 1..1 string Literal reference, Relative, internal or absolute URL
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... referenceRange SOC 0..* BackboneElement Provides guide for interpretation
obs-3: Must have at least a low or a high or text
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... low SOC 0..1 SimpleQuantity Low Range, if relevant
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... high SOC 0..1 SimpleQuantity High Range, if relevant
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... type SO 0..1 CodeableConcept Reference range qualifier
Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... text SO 0..1 string Text based reference range in an observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... hasMember SOΣC 0..* Reference(AU Core Pathology Result Observation) Individual observations in a group, study, or panel
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... reference OΣC 1..1 string Literal reference, Relative, internal or absolute URL
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... component SOΣC 0..* BackboneElement Individual tests in a group or panel
au-core-obs-06: The component shall at least have a value or a data absent reason
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... code SOΣ 1..1 CodeableConcept Individual pathology test
Binding: RCPA SPIA Pathology Reporting . (extensible)
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... value[x] SOΣC 0..1 Actual component result
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
..... valueQuantity Quantity
..... valueCodeableConcept CodeableConcept
..... valueString string
..... valueBoolean boolean
..... valueInteger integer
..... valueRange Range
..... valueRatio Ratio
..... valueSampledData SampledData
..... valueTime time
..... valueDateTime dateTime
..... valuePeriod Period
.... dataAbsentReason SOC 0..1 CodeableConcept Why the component result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
Observation.statusrequiredObservationStatus
http://hl7.org/fhir/ValueSet/observation-status|4.0.1
from the FHIR Standard
Observation.categorypreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.category:labpreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.category:specificDisciplineextensiblePathologyDiagnosticServiceCategory .
https://healthterminologies.gov.au/fhir/ValueSet/pathology-diagnostic-service-category-1
Observation.codeextensibleRCPASPIAPathologyReporting .
https://healthterminologies.gov.au/fhir/ValueSet/spia-pathology-reporting-1
Observation.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard
Observation.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
from the FHIR Standard
Observation.methodexampleObservationMethods
http://hl7.org/fhir/ValueSet/observation-methods
from the FHIR Standard
Observation.referenceRange.typepreferredObservationReferenceRangeMeaningCodes
http://hl7.org/fhir/ValueSet/referencerange-meaning
from the FHIR Standard
Observation.component.codeextensibleRCPASPIAPathologyReporting .
https://healthterminologies.gov.au/fhir/ValueSet/spia-pathology-reporting-1
Observation.component.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
au-core-obs-01errorObservation.effective[x]Date shall be at least to day
: $this is DateTime implies $this.toString().length() >= 10
au-core-obs-05errorObservationIf there is no component or hasMember element then at least value or data absent reason shall be present
: (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
au-core-obs-06errorObservation.componentThe component shall at least have a value or a data absent reason
: value.exists() or dataAbsentReason.exists()
dom-2errorObservationIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3errorObservationIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4errorObservationIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5errorObservationIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6best practiceObservationA resource should have narrative for robust management
: text.`div`.exists()
ele-1error**ALL** elementsAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1error**ALL** extensionsMust have either extensions or value[x], not both
: extension.exists() != value.exists()
inv-obs-0errorObservationA pathology result shall at least have value or data absent reason or a child observation with a value or data absent reason
: value.exists() or dataAbsentReason.exists() or hasMember.exists() or component.value.exists() or component.dataAbsentReason.exists()
obs-3errorObservation.referenceRangeMust have at least a low or a high or text
: low.exists() or high.exists() or text.exists()
obs-6errorObservationdataAbsentReason SHALL only be present if Observation.value[x] is not present
: dataAbsentReason.empty() or value.empty()
obs-7errorObservationIf Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
: value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

Snapshot View

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation C 0..* AUBasePathologyResult A pathology test result in an Australian healthcare context
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
inv-obs-0: A pathology result shall at least have value or data absent reason or a child observation with a value or data absent reason
au-core-obs-05: If there is no component or hasMember element then at least value or data absent reason shall be present
... id Σ 0..1 id Logical id of this artifact
... meta Σ 0..1 Meta Metadata about the resource
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... language 0..1 code Language of the resource content
Binding: CommonLanguages (preferred): A human language.

Additional BindingsPurpose
AllLanguages Max Binding
... text 0..1 Narrative Text summary of the resource, for human interpretation
... contained 0..* Resource Contained, inline Resources
... extension 0..* Extension Additional content defined by implementations
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... identifier SOΣ 0..* Identifier Business Identifier for observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... basedOn Σ 0..* Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest) Fulfills plan, proposal or order
... partOf Σ 0..* Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy) Part of referenced event
... status ?!SOΣ 1..1 code preliminary | final | amended +
Binding: ObservationStatus (required): Codes providing the status of an observation.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... Slices for category SO 1..* CodeableConcept Classification of the service requested as laboratory + more specific discipline where available
Slice: Unordered, Open by value:coding.system, value:coding.code
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... category:lab 1..1 CodeableConcept Observation generated by laboratories
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... coding Σ 1..* Coding Code defined by a terminology system
...... id 0..1 string Unique id for inter-element referencing
...... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
...... system Σ 1..1 uri Identity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
...... version Σ 0..1 string Version of the system - if relevant
...... code Σ 1..1 code Symbol in syntax defined by the system
Fixed Value: laboratory
...... display Σ 0..1 string Representation defined by the system
...... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
..... text Σ 0..1 string Plain text representation of the concept
.... category:specificDiscipline 0..* CodeableConcept Specific discipline of pathology
Binding: Pathology Diagnostic Service Category . (extensible)
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... coding Σ 0..* Coding Code defined by a terminology system
...... id 0..1 string Unique id for inter-element referencing
...... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
...... system Σ 1..1 uri Identity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/v2-0074
...... version Σ 0..1 string Version of the system - if relevant
...... code Σ 0..1 code Symbol in syntax defined by the system
...... display Σ 0..1 string Representation defined by the system
...... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
..... text Σ 0..1 string Plain text representation of the concept
... code SOΣ 1..1 CodeableConcept Pathology test or test group
Binding: RCPA SPIA Pathology Reporting . (extensible)
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... subject SOΣ 1..1 Reference(AU Core Patient) Who and/or what the observation is about
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... focus Σ 0..* Reference(Resource) What the observation is about, when it is not about the subject of record
... encounter Σ 0..1 Reference(Encounter) Healthcare event during which this observation is made
... effective[x] SOΣC 1..1 Time of specimen collection
au-core-obs-01: Date shall be at least to day
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... effectiveDateTime dateTime
.... effectivePeriod Period
... issued Σ 0..1 instant Date/Time this version was made available
... performer SOΣ 0..* Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | AU Base Related Person) Who is responsible for the observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... value[x] SOΣC 0..1 Actual result
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... valueQuantity Quantity
.... valueCodeableConcept CodeableConcept
.... valueString string
.... valueBoolean boolean
.... valueInteger integer
.... valueRange Range
.... valueRatio Ratio
.... valueSampledData SampledData
.... valueTime time
.... valueDateTime dateTime
.... valuePeriod Period
... dataAbsentReason SOC 0..1 CodeableConcept Why the result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... interpretation SO 0..* CodeableConcept High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... note SO 0..* Annotation Comments about the observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... bodySite 0..1 CodeableConcept Observed body part
Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.

... method SO 0..1 CodeableConcept How it was done
Binding: ObservationMethods (example): Methods for simple observations.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... specimen SO 0..1 Reference(AU Base Specimen) Specimen used for this observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... reference OΣC 1..1 string Literal reference, Relative, internal or absolute URL
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... type Σ 0..1 uri Type the reference refers to (e.g. "Patient")
Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).

.... identifier Σ 0..1 Identifier Logical reference, when literal reference is not known
.... display Σ 0..1 string Text alternative for the resource
... device 0..1 Reference(Device | DeviceMetric) (Measurement) Device
... referenceRange SOC 0..* BackboneElement Provides guide for interpretation
obs-3: Must have at least a low or a high or text
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... low SOC 0..1 SimpleQuantity Low Range, if relevant
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... high SOC 0..1 SimpleQuantity High Range, if relevant
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... type SO 0..1 CodeableConcept Reference range qualifier
Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... appliesTo 0..* CodeableConcept Reference range population
Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.


.... age 0..1 Range Applicable age range, if relevant
.... text SO 0..1 string Text based reference range in an observation
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
... hasMember SOΣC 0..* Reference(AU Core Pathology Result Observation) Individual observations in a group, study, or panel
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... reference OΣC 1..1 string Literal reference, Relative, internal or absolute URL
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... type Σ 0..1 uri Type the reference refers to (e.g. "Patient")
Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).

.... identifier Σ 0..1 Identifier Logical reference, when literal reference is not known
.... display Σ 0..1 string Text alternative for the resource
... derivedFrom Σ 0..* Reference(DocumentReference | ImagingStudy | Media | QuestionnaireResponse | Observation | MolecularSequence) Related measurements the observation is made from
... component SOΣC 0..* BackboneElement Individual tests in a group or panel
au-core-obs-06: The component shall at least have a value or a data absent reason
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... code SOΣ 1..1 CodeableConcept Individual pathology test
Binding: RCPA SPIA Pathology Reporting . (extensible)
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... value[x] SOΣC 0..1 Actual component result
ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
..... valueQuantity Quantity
..... valueCodeableConcept CodeableConcept
..... valueString string
..... valueBoolean boolean
..... valueInteger integer
..... valueRange Range
..... valueRatio Ratio
..... valueSampledData SampledData
..... valueTime time
..... valueDateTime dateTime
..... valuePeriod Period
.... dataAbsentReason SOC 0..1 CodeableConcept Why the component result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

ObligationsActor
SHALL:populate-if-known AU Core Responder
SHALL:no-error AU Core Requester
.... interpretation 0..* CodeableConcept High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


.... referenceRange 0..* See referenceRange (Observation) Provides guide for interpretation of component result

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
Observation.languagepreferredCommonLanguages
Additional Bindings Purpose
AllLanguages Max Binding
http://hl7.org/fhir/ValueSet/languages
from the FHIR Standard
Observation.statusrequiredObservationStatus
http://hl7.org/fhir/ValueSet/observation-status|4.0.1
from the FHIR Standard
Observation.categorypreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.category:labpreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
from the FHIR Standard
Observation.category:specificDisciplineextensiblePathologyDiagnosticServiceCategory .
https://healthterminologies.gov.au/fhir/ValueSet/pathology-diagnostic-service-category-1
Observation.codeextensibleRCPASPIAPathologyReporting .
https://healthterminologies.gov.au/fhir/ValueSet/spia-pathology-reporting-1
Observation.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard
Observation.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
from the FHIR Standard
Observation.bodySiteexampleSNOMEDCTBodyStructures
http://hl7.org/fhir/ValueSet/body-site
from the FHIR Standard
Observation.methodexampleObservationMethods
http://hl7.org/fhir/ValueSet/observation-methods
from the FHIR Standard
Observation.specimen.typeextensibleResourceType
http://hl7.org/fhir/ValueSet/resource-types
from the FHIR Standard
Observation.referenceRange.typepreferredObservationReferenceRangeMeaningCodes
http://hl7.org/fhir/ValueSet/referencerange-meaning
from the FHIR Standard
Observation.referenceRange.appliesToexampleObservationReferenceRangeAppliesToCodes
http://hl7.org/fhir/ValueSet/referencerange-appliesto
from the FHIR Standard
Observation.hasMember.typeextensibleResourceType
http://hl7.org/fhir/ValueSet/resource-types
from the FHIR Standard
Observation.component.codeextensibleRCPASPIAPathologyReporting .
https://healthterminologies.gov.au/fhir/ValueSet/spia-pathology-reporting-1
Observation.component.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
from the FHIR Standard
Observation.component.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
from the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
au-core-obs-01errorObservation.effective[x]Date shall be at least to day
: $this is DateTime implies $this.toString().length() >= 10
au-core-obs-05errorObservationIf there is no component or hasMember element then at least value or data absent reason shall be present
: (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
au-core-obs-06errorObservation.componentThe component shall at least have a value or a data absent reason
: value.exists() or dataAbsentReason.exists()
dom-2errorObservationIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3errorObservationIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4errorObservationIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5errorObservationIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6best practiceObservationA resource should have narrative for robust management
: text.`div`.exists()
ele-1error**ALL** elementsAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1error**ALL** extensionsMust have either extensions or value[x], not both
: extension.exists() != value.exists()
inv-obs-0errorObservationA pathology result shall at least have value or data absent reason or a child observation with a value or data absent reason
: value.exists() or dataAbsentReason.exists() or hasMember.exists() or component.value.exists() or component.dataAbsentReason.exists()
obs-3errorObservation.referenceRangeMust have at least a low or a high or text
: low.exists() or high.exists() or text.exists()
obs-6errorObservationdataAbsentReason SHALL only be present if Observation.value[x] is not present
: dataAbsentReason.empty() or value.empty()
obs-7errorObservationIf Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
: value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

 

Other representations of profile: CSV, Excel, Schematron

Notes:

Below is an overview of the mandatory and optional search parameters and combined search parameters. See the AU Core CapabilityStatements for a complete list of supported RESTful interactions for this IG.

FHIR search operations are described here and the syntax used to describe AU Core interactions is defined here.

Any search parameter defined in FHIR may be ‘allowed’ by the system unless explicitly marked as “SHALL NOT”. A few items are marked as MAY in this implementation guide to highlight their potential relevance.

Parameter(s) Conformance Type(s) Requirements (when used alone or in combination)
patient SHALL reference The requester SHALL provide at least an id value and MAY provide both the Type and id values. The responder SHALL support both.
patient+category SHALL reference+token
patient+category+date SHALL reference+token+date
patient+code SHALL reference+token
patient+category+status SHOULD reference+token+token
patient+code+date SHOULD reference+token+date
patient.identifier SHOULD reference.token The requester SHALL provide both the system and code values. The responder SHALL support both. The requester SHOULD support search using IHI, Medicare Number, and DVA Number identifiers as defined in the AU Core Patient profile. The responder SHOULD support search using the using IHI, Medicare Number, and DVA Number identifiers as defined in the AU Core Patient profile.
category MAY token The requester SHALL provide at least a code value and MAY provide both the system and code values. The responder SHALL support both.
code MAY token The requester SHALL provide at least a code value and MAY provide both the system and code values. The responder SHALL support both.
date MAY date A requester SHALL provide a value precise to the second + time offset. A responder SHALL support a value precise to the second + time offset.
status MAY token The requester SHALL provide at least a code value and MAY provide both the system and code values. The responder SHALL support both.

Mandatory Search Parameters:

The following search parameters and search parameter combinations SHALL be supported:

  1. SHALL support searching using the patient search parameter:
    • SHOULD support chained searching of patient canonical identifier patient.identifier (e.g. patient.identifier=[system|][code])

    GET [base]/Observation?patient={Type/}[id] or optionally GET [base]/Observation?patient.identifier=[system|][code]

    Example:

    1. GET [base]/Observation?patient=5678
    2. GET [base]/Observation?patient.identifier=http://ns.electronichealth.net.au/id/medicare-number|32788511952
    3. GET [base]/Observation?patient.identifier=http://ns.electronichealth.net.au/id/hi/ihi/1.0|8003608833357361

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient (how to search by reference and how to search by token)

  2. SHALL support searching using the combination of the patient and category search parameters:
    • SHOULD support chained searching of patient canonical identifier patient.identifier (e.g. patient.identifier=[system|][code])

    GET [base]/Observation?patient={Type/}[id]&category=http://terminology.hl7.org/CodeSystem/observation-category|laboratory

    Example:

    1. GET [base]/Observation?patient=5678&category=http://terminology.hl7.org/CodeSystem/observation-category|laboratory

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and a category code = laboratory (how to search by reference and how to search by token)

  3. SHALL support searching using the combination of the patient and code search parameters:
    • SHOULD support chained searching of patient canonical identifier patient.identifier (e.g. patient.identifier=[system|][code])
    • SHOULD support multipleOr search on code (e.g.code={system|}[code],{system|}[code],...)

    GET [base]/Observation?patient={Type/}[id]&code={system|}[code]{,{system|}[code],...}

    Example:

    1. GET [base]/Observation?patient=5678&code=http://loinc.org|6690-2,http://loinc.org|789-8

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and observation code(s). The Observation code parameter searches Observation.code only. (how to search by reference and how to search by token)

  4. SHALL support searching using the combination of the patient and category and date search parameters:
    • SHOULD support chained searching of patient canonical identifier patient.identifier (e.g. patient.identifier=[system|][code])
    • SHALL support these date comparators: gt,lt,ge,le
    • SHOULD support multipleAnd search on date (e.g.date=[date]&date=[date]]&...)

    GET [base]/Observation?patient={Type/}[id]&category=http://terminology.hl7.org/CodeSystem/observation-category|laboratory&date={gt|lt|ge|le}[date]{&date={gt|lt|ge|le}[date]&...}

    Example:

    1. GET [base]/Observation?patient=5678&category=http://terminology.hl7.org/CodeSystem/observation-category|laboratory&date=ge2020-01-01T00:00:00Z 1. GET [base]/Observation?patient=5678&category=http://terminology.hl7.org/CodeSystem/observation-category|laboratory&date=ge2020-01-01T00:00:00Z

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and date and a category code = laboratory (how to search by reference and how to search by token and how to search by date)

Optional Search Parameters:

The following search parameters and search parameter combinations SHOULD be supported:

  1. SHOULD support searching using the combination of the patient and category and status search parameters:
    • SHOULD support chained searching of patient canonical identifier patient.identifier (e.g. patient.identifier=[system|][code])
    • SHALL support multipleOr search on status (e.g.status={system|}[code],{system|}[code],...)

    GET [base]/Observation?patient={Type/}[id]&category=http://terminology.hl7.org/CodeSystem/observation-category|laboratory&status={system|}[code]{,{system|}[code],...}

    Example:

    1. GET [base]/Observation?patient=5678&category=http://terminology.hl7.org/CodeSystem/observation-category|laboratory&status=final

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and category and status (how to search by reference and how to search by token)

  2. SHOULD support searching using the combination of the patient and code and date search parameters:
    • SHOULD support chained searching of patient canonical identifier patient.identifier (e.g. patient.identifier=[system|][code]
    • SHOULD support multipleOr search on code (e.g.code={system|}[code],{system|}[code],...)
    • SHALL support these date comparators: gt,lt,ge,le
    • SHOULD support multipleAnd search on date (e.g.date=[date]&date=[date]]&...)

    GET [base]/Observation?patient={Type/}[id]&code={system|}[code]{,{system|}[code],...}&date={gt|lt|ge|le}[date]{&date={gt|lt|ge|le}[date]&...}

    Example:

    1. GET [base]/Observation?patient=5678&code=http://loinc.org|6690-2,http://loinc.org|789-8&date=ge2020-01-01T00:00:00Z
    2. GET [base]/Observation?patient.identifier=http://example.org/fhir/mrn|12345&code=http://loinc.org|6690-2,http://loinc.org|789-8&date=ge2020-01-01T00:00:00Z

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and date and observation code(s) (how to search by reference and how to search by token and how to search by date)