Usage scenarios

The following are supported usage scenarios for this profile:

• Query for diagnostic results for a patient
• Query for category of diagnostic results (e.g. all cardiology results)
• Record or update a diagnostic result for a patient

Profile specific implementation guidance

• Observation.category provides an efficient way of supporting system interactions, e.g. restricting searches. Implementers need to understand that data categorisation is somewhat subjective. The categorisation applied by the source may not align with a receiver’s expectations.
• The observations MAY have additional codes that translate or map to the Observation code or category codes. For example:
  • providing a local code
  • providing a more specific code
• The Observation resource can represent a result using one or both of a single value with Observation.value, or set of results using either Observation.component.value or Observation.hasMember.
  • Although all are marked as must support, sending systems are not required to support all choices, but they SHALL support at least one of these elements
  • A receiving or persisting system SHALL support both elements
• Observation.identifier may contain the same identifier as in the order or report connecting the resources that are related to a single request fulfilment workflow

• Differential Table
• Key Elements Table
• Snapshot Table
• Statistics/References
• All

This structure is derived from Observation

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	Observation	Measurements and simple assertions au-core-obs-05: If there is no component or hasMember element then at least value or data absent reason shall be present
identifier	S	0..*	Identifier	Business Identifier for observation
status	S	1..1	code	preliminary | final | amended + Binding: https://healthterminologies.gov.au/fhir/ValueSet/observationstatus-result-available-1 (required)
category	S	1..*	CodeableConcept	Classification of type of observation
code	S	1..1	CodeableConcept	Type of observation (code / type)
subject	S	1..1	Reference(AU Core Patient)	Who and/or what the observation is about
effective[x]	SC	1..1	dateTime, Period, Timing, instant	Clinically relevant time/time-period for observation au-core-obs-01: Date shall be at least to day
performer	S	0..*	Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | AU Core RelatedPerson)	Who is responsible for the observation
value[x]	SC	0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual result
dataAbsentReason	SC	0..1	CodeableConcept	Why the result is missing
interpretation	S	0..*	CodeableConcept	High, low, normal, etc.
note	S	0..*	Annotation	Comments about the observation
bodySite	SC	0..1	CodeableConcept	Observed body part Binding: https://healthterminologies.gov.au/fhir/ValueSet/body-site-1 (extensible) au-core-obs-04: If a coded body site is provided, at least one code shall be from SNOMED CT
method	S	0..1	CodeableConcept	How it was done
referenceRange	S	0..*	BackboneElement	Provides guide for interpretation
low	S	0..1	SimpleQuantity	Low Range, if relevant
high	S	0..1	SimpleQuantity	High Range, if relevant
type	S	0..1	CodeableConcept	Reference range qualifier
text	S	0..1	string	Text based reference range in an observation
hasMember	S	0..*	Reference(AU Core Diagnostic Result Observation | AU Core Diagnostic Imaging Result Observation | AU Core Pathology Result Observation)	Individual observations in a group, study, or panel
reference		1..1	string	Literal reference, Relative, internal or absolute URL
component	SC	0..*	BackboneElement	Component results au-core-obs-06: The component shall at least have a value or a data absent reason
code	S	1..1	CodeableConcept	Type of component observation (code / type)
value[x]	SC	0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result
dataAbsentReason	SC	0..1	CodeableConcept	Why the component result is missing
Documentation for this format

Terminology Bindings (Differential)

Path	Conformance	ValueSet
Observation.status	required	https://healthterminologies.gov.au/fhir/ValueSet/observationstatus-result-available-1
Observation.bodySite	extensible	https://healthterminologies.gov.au/fhir/ValueSet/body-site-1

Constraints

Id	Grade	Path(s)	Details	Requirements
au-core-obs-01	error	Observation.effective[x]	Date shall be at least to day : $this is DateTime implies $this.toString().length() >= 10
au-core-obs-04	error	Observation.bodySite	If a coded body site is provided, at least one code shall be from SNOMED CT : coding.exists() implies coding.where(system='http://snomed.info/sct').exists()
au-core-obs-05	error	Observation	If there is no component or hasMember element then at least value or data absent reason shall be present : (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
au-core-obs-06	error	Observation.component	The component shall at least have a value or a data absent reason : value.exists() or dataAbsentReason.exists()

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	Observation	Measurements and simple assertions au-core-obs-05: If there is no component or hasMember element then at least value or data absent reason shall be present
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
identifier	SΣ	0..*	Identifier	Business Identifier for observation
status	?!SΣ	1..1	code	preliminary | final | amended + Binding: https://healthterminologies.gov.au/fhir/ValueSet/observationstatus-result-available-1 (required)
category	S	1..*	CodeableConcept	Classification of type of observation Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
code	SΣ	1..1	CodeableConcept	Type of observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
subject	SΣ	1..1	Reference(AU Core Patient)	Who and/or what the observation is about
effective[x]	SΣC	1..1		Clinically relevant time/time-period for observation au-core-obs-01: Date shall be at least to day
effectiveDateTime			dateTime
effectivePeriod			Period
effectiveTiming			Timing
effectiveInstant			instant
performer	SΣ	0..*	Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | AU Core RelatedPerson)	Who is responsible for the observation
value[x]	SΣC	0..1		Actual result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	SC	0..1	CodeableConcept	Why the result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation	S	0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
note	S	0..*	Annotation	Comments about the observation
bodySite	SC	0..1	CodeableConcept	Observed body part Binding: https://healthterminologies.gov.au/fhir/ValueSet/body-site-1 (extensible) au-core-obs-04: If a coded body site is provided, at least one code shall be from SNOMED CT
method	S	0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations.
referenceRange	SC	0..*	BackboneElement	Provides guide for interpretation
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
low	SC	0..1	SimpleQuantity	Low Range, if relevant
high	SC	0..1	SimpleQuantity	High Range, if relevant
type	S	0..1	CodeableConcept	Reference range qualifier Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.
text	S	0..1	string	Text based reference range in an observation
hasMember	SΣ	0..*	Reference(AU Core Diagnostic Result Observation | AU Core Diagnostic Imaging Result Observation | AU Core Pathology Result Observation)	Individual observations in a group, study, or panel
reference	ΣC	1..1	string	Literal reference, Relative, internal or absolute URL
component	SΣC	0..*	BackboneElement	Component results au-core-obs-06: The component shall at least have a value or a data absent reason
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	SΣ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
value[x]	SΣC	0..1		Actual component result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	SC	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet
Observation.status	required	https://healthterminologies.gov.au/fhir/ValueSet/observationstatus-result-available-1
Observation.category	preferred	ObservationCategoryCodes
Observation.code	example	LOINCCodes (a valid code from LOINC)
Observation.dataAbsentReason	extensible	DataAbsentReason
Observation.interpretation	extensible	ObservationInterpretationCodes
Observation.bodySite	extensible	https://healthterminologies.gov.au/fhir/ValueSet/body-site-1
Observation.method	example	ObservationMethods
Observation.referenceRange.type	preferred	ObservationReferenceRangeMeaningCodes
Observation.component.code	example	LOINCCodes (a valid code from LOINC)
Observation.component.dataAbsentReason	extensible	DataAbsentReason

Constraints

Id	Grade	Path(s)	Details	Requirements
au-core-obs-01	error	Observation.effective[x]	Date shall be at least to day : $this is DateTime implies $this.toString().length() >= 10
au-core-obs-04	error	Observation.bodySite	If a coded body site is provided, at least one code shall be from SNOMED CT : coding.exists() implies coding.where(system='http://snomed.info/sct').exists()
au-core-obs-05	error	Observation	If there is no component or hasMember element then at least value or data absent reason shall be present : (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
au-core-obs-06	error	Observation.component	The component shall at least have a value or a data absent reason : value.exists() or dataAbsentReason.exists()

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	Observation	Measurements and simple assertions au-core-obs-05: If there is no component or hasMember element then at least value or data absent reason shall be present
id	Σ	0..1	id	Logical id of this artifact
meta	Σ	0..1	Meta	Metadata about the resource
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
language		0..1	code	Language of the resource content Binding: CommonLanguages (preferred): A human language. Additional Bindings Purpose AllLanguages Max Binding
text		0..1	Narrative	Text summary of the resource, for human interpretation
contained		0..*	Resource	Contained, inline Resources
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
identifier	SΣ	0..*	Identifier	Business Identifier for observation
basedOn	Σ	0..*	Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest)	Fulfills plan, proposal or order
partOf	Σ	0..*	Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy)	Part of referenced event
status	?!SΣ	1..1	code	preliminary | final | amended + Binding: https://healthterminologies.gov.au/fhir/ValueSet/observationstatus-result-available-1 (required)
category	S	1..*	CodeableConcept	Classification of type of observation Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
code	SΣ	1..1	CodeableConcept	Type of observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
subject	SΣ	1..1	Reference(AU Core Patient)	Who and/or what the observation is about
focus	ΣTU	0..*	Reference(Resource)	What the observation is about, when it is not about the subject of record
encounter	Σ	0..1	Reference(Encounter)	Healthcare event during which this observation is made
effective[x]	SΣC	1..1		Clinically relevant time/time-period for observation au-core-obs-01: Date shall be at least to day
effectiveDateTime			dateTime
effectivePeriod			Period
effectiveTiming			Timing
effectiveInstant			instant
issued	Σ	0..1	instant	Date/Time this version was made available
performer	SΣ	0..*	Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | AU Core RelatedPerson)	Who is responsible for the observation
value[x]	SΣC	0..1		Actual result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	SC	0..1	CodeableConcept	Why the result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation	S	0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
note	S	0..*	Annotation	Comments about the observation
bodySite	SC	0..1	CodeableConcept	Observed body part Binding: https://healthterminologies.gov.au/fhir/ValueSet/body-site-1 (extensible) au-core-obs-04: If a coded body site is provided, at least one code shall be from SNOMED CT
method	S	0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations.
specimen		0..1	Reference(Specimen)	Specimen used for this observation
device		0..1	Reference(Device | DeviceMetric)	(Measurement) Device
referenceRange	SC	0..*	BackboneElement	Provides guide for interpretation
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
low	SC	0..1	SimpleQuantity	Low Range, if relevant
high	SC	0..1	SimpleQuantity	High Range, if relevant
type	S	0..1	CodeableConcept	Reference range qualifier Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.
appliesTo		0..*	CodeableConcept	Reference range population Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.
age		0..1	Range	Applicable age range, if relevant
text	S	0..1	string	Text based reference range in an observation
hasMember	SΣ	0..*	Reference(AU Core Diagnostic Result Observation | AU Core Diagnostic Imaging Result Observation | AU Core Pathology Result Observation)	Individual observations in a group, study, or panel
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
reference	ΣC	1..1	string	Literal reference, Relative, internal or absolute URL
type	Σ	0..1	uri	Type the reference refers to (e.g. "Patient") Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).
identifier	Σ	0..1	Identifier	Logical reference, when literal reference is not known
display	Σ	0..1	string	Text alternative for the resource
derivedFrom	Σ	0..*	Reference(DocumentReference | ImagingStudy | Media | QuestionnaireResponse | Observation | MolecularSequence)	Related measurements the observation is made from
component	SΣC	0..*	BackboneElement	Component results au-core-obs-06: The component shall at least have a value or a data absent reason
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	SΣ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
value[x]	SΣC	0..1		Actual component result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	SC	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet
Observation.language	preferred	CommonLanguages Additional Bindings Purpose AllLanguages Max Binding
Observation.status	required	https://healthterminologies.gov.au/fhir/ValueSet/observationstatus-result-available-1
Observation.category	preferred	ObservationCategoryCodes
Observation.code	example	LOINCCodes (a valid code from LOINC)
Observation.dataAbsentReason	extensible	DataAbsentReason
Observation.interpretation	extensible	ObservationInterpretationCodes
Observation.bodySite	extensible	https://healthterminologies.gov.au/fhir/ValueSet/body-site-1
Observation.method	example	ObservationMethods
Observation.referenceRange.type	preferred	ObservationReferenceRangeMeaningCodes
Observation.referenceRange.appliesTo	example	ObservationReferenceRangeAppliesToCodes
Observation.hasMember.type	extensible	ResourceType
Observation.component.code	example	LOINCCodes (a valid code from LOINC)
Observation.component.dataAbsentReason	extensible	DataAbsentReason
Observation.component.interpretation	extensible	ObservationInterpretationCodes

Constraints

Id	Grade	Path(s)	Details	Requirements
au-core-obs-01	error	Observation.effective[x]	Date shall be at least to day : $this is DateTime implies $this.toString().length() >= 10
au-core-obs-04	error	Observation.bodySite	If a coded body site is provided, at least one code shall be from SNOMED CT : coding.exists() implies coding.where(system='http://snomed.info/sct').exists()
au-core-obs-06	error	Observation.component	The component shall at least have a value or a data absent reason : value.exists() or dataAbsentReason.exists()

Differential View

This structure is derived from Observation

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	Observation	Measurements and simple assertions au-core-obs-05: If there is no component or hasMember element then at least value or data absent reason shall be present
identifier	S	0..*	Identifier	Business Identifier for observation
status	S	1..1	code	preliminary | final | amended + Binding: https://healthterminologies.gov.au/fhir/ValueSet/observationstatus-result-available-1 (required)
category	S	1..*	CodeableConcept	Classification of type of observation
code	S	1..1	CodeableConcept	Type of observation (code / type)
subject	S	1..1	Reference(AU Core Patient)	Who and/or what the observation is about
effective[x]	SC	1..1	dateTime, Period, Timing, instant	Clinically relevant time/time-period for observation au-core-obs-01: Date shall be at least to day
performer	S	0..*	Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | AU Core RelatedPerson)	Who is responsible for the observation
value[x]	SC	0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual result
dataAbsentReason	SC	0..1	CodeableConcept	Why the result is missing
interpretation	S	0..*	CodeableConcept	High, low, normal, etc.
note	S	0..*	Annotation	Comments about the observation
bodySite	SC	0..1	CodeableConcept	Observed body part Binding: https://healthterminologies.gov.au/fhir/ValueSet/body-site-1 (extensible) au-core-obs-04: If a coded body site is provided, at least one code shall be from SNOMED CT
method	S	0..1	CodeableConcept	How it was done
referenceRange	S	0..*	BackboneElement	Provides guide for interpretation
low	S	0..1	SimpleQuantity	Low Range, if relevant
high	S	0..1	SimpleQuantity	High Range, if relevant
type	S	0..1	CodeableConcept	Reference range qualifier
text	S	0..1	string	Text based reference range in an observation
hasMember	S	0..*	Reference(AU Core Diagnostic Result Observation | AU Core Diagnostic Imaging Result Observation | AU Core Pathology Result Observation)	Individual observations in a group, study, or panel
reference		1..1	string	Literal reference, Relative, internal or absolute URL
component	SC	0..*	BackboneElement	Component results au-core-obs-06: The component shall at least have a value or a data absent reason
code	S	1..1	CodeableConcept	Type of component observation (code / type)
value[x]	SC	0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result
dataAbsentReason	SC	0..1	CodeableConcept	Why the component result is missing
Documentation for this format

Terminology Bindings (Differential)

Path	Conformance	ValueSet
Observation.status	required	https://healthterminologies.gov.au/fhir/ValueSet/observationstatus-result-available-1
Observation.bodySite	extensible	https://healthterminologies.gov.au/fhir/ValueSet/body-site-1

Constraints

Id	Grade	Path(s)	Details	Requirements
au-core-obs-01	error	Observation.effective[x]	Date shall be at least to day : $this is DateTime implies $this.toString().length() >= 10
au-core-obs-04	error	Observation.bodySite	If a coded body site is provided, at least one code shall be from SNOMED CT : coding.exists() implies coding.where(system='http://snomed.info/sct').exists()
au-core-obs-05	error	Observation	If there is no component or hasMember element then at least value or data absent reason shall be present : (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
au-core-obs-06	error	Observation.component	The component shall at least have a value or a data absent reason : value.exists() or dataAbsentReason.exists()

Key Elements View

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	Observation	Measurements and simple assertions au-core-obs-05: If there is no component or hasMember element then at least value or data absent reason shall be present
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
identifier	SΣ	0..*	Identifier	Business Identifier for observation
status	?!SΣ	1..1	code	preliminary | final | amended + Binding: https://healthterminologies.gov.au/fhir/ValueSet/observationstatus-result-available-1 (required)
category	S	1..*	CodeableConcept	Classification of type of observation Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
code	SΣ	1..1	CodeableConcept	Type of observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
subject	SΣ	1..1	Reference(AU Core Patient)	Who and/or what the observation is about
effective[x]	SΣC	1..1		Clinically relevant time/time-period for observation au-core-obs-01: Date shall be at least to day
effectiveDateTime			dateTime
effectivePeriod			Period
effectiveTiming			Timing
effectiveInstant			instant
performer	SΣ	0..*	Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | AU Core RelatedPerson)	Who is responsible for the observation
value[x]	SΣC	0..1		Actual result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	SC	0..1	CodeableConcept	Why the result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation	S	0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
note	S	0..*	Annotation	Comments about the observation
bodySite	SC	0..1	CodeableConcept	Observed body part Binding: https://healthterminologies.gov.au/fhir/ValueSet/body-site-1 (extensible) au-core-obs-04: If a coded body site is provided, at least one code shall be from SNOMED CT
method	S	0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations.
referenceRange	SC	0..*	BackboneElement	Provides guide for interpretation
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
low	SC	0..1	SimpleQuantity	Low Range, if relevant
high	SC	0..1	SimpleQuantity	High Range, if relevant
type	S	0..1	CodeableConcept	Reference range qualifier Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.
text	S	0..1	string	Text based reference range in an observation
hasMember	SΣ	0..*	Reference(AU Core Diagnostic Result Observation | AU Core Diagnostic Imaging Result Observation | AU Core Pathology Result Observation)	Individual observations in a group, study, or panel
reference	ΣC	1..1	string	Literal reference, Relative, internal or absolute URL
component	SΣC	0..*	BackboneElement	Component results au-core-obs-06: The component shall at least have a value or a data absent reason
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	SΣ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
value[x]	SΣC	0..1		Actual component result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	SC	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet
Observation.status	required	https://healthterminologies.gov.au/fhir/ValueSet/observationstatus-result-available-1
Observation.category	preferred	ObservationCategoryCodes
Observation.code	example	LOINCCodes (a valid code from LOINC)
Observation.dataAbsentReason	extensible	DataAbsentReason
Observation.interpretation	extensible	ObservationInterpretationCodes
Observation.bodySite	extensible	https://healthterminologies.gov.au/fhir/ValueSet/body-site-1
Observation.method	example	ObservationMethods
Observation.referenceRange.type	preferred	ObservationReferenceRangeMeaningCodes
Observation.component.code	example	LOINCCodes (a valid code from LOINC)
Observation.component.dataAbsentReason	extensible	DataAbsentReason

Constraints

Id	Grade	Path(s)	Details	Requirements
au-core-obs-01	error	Observation.effective[x]	Date shall be at least to day : $this is DateTime implies $this.toString().length() >= 10
au-core-obs-04	error	Observation.bodySite	If a coded body site is provided, at least one code shall be from SNOMED CT : coding.exists() implies coding.where(system='http://snomed.info/sct').exists()
au-core-obs-05	error	Observation	If there is no component or hasMember element then at least value or data absent reason shall be present : (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
au-core-obs-06	error	Observation.component	The component shall at least have a value or a data absent reason : value.exists() or dataAbsentReason.exists()

Snapshot View

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	Observation	Measurements and simple assertions au-core-obs-05: If there is no component or hasMember element then at least value or data absent reason shall be present
id	Σ	0..1	id	Logical id of this artifact
meta	Σ	0..1	Meta	Metadata about the resource
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
language		0..1	code	Language of the resource content Binding: CommonLanguages (preferred): A human language. Additional Bindings Purpose AllLanguages Max Binding
text		0..1	Narrative	Text summary of the resource, for human interpretation
contained		0..*	Resource	Contained, inline Resources
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
identifier	SΣ	0..*	Identifier	Business Identifier for observation
basedOn	Σ	0..*	Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest)	Fulfills plan, proposal or order
partOf	Σ	0..*	Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy)	Part of referenced event
status	?!SΣ	1..1	code	preliminary | final | amended + Binding: https://healthterminologies.gov.au/fhir/ValueSet/observationstatus-result-available-1 (required)
category	S	1..*	CodeableConcept	Classification of type of observation Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
code	SΣ	1..1	CodeableConcept	Type of observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
subject	SΣ	1..1	Reference(AU Core Patient)	Who and/or what the observation is about
focus	ΣTU	0..*	Reference(Resource)	What the observation is about, when it is not about the subject of record
encounter	Σ	0..1	Reference(Encounter)	Healthcare event during which this observation is made
effective[x]	SΣC	1..1		Clinically relevant time/time-period for observation au-core-obs-01: Date shall be at least to day
effectiveDateTime			dateTime
effectivePeriod			Period
effectiveTiming			Timing
effectiveInstant			instant
issued	Σ	0..1	instant	Date/Time this version was made available
performer	SΣ	0..*	Reference(AU Core Practitioner | AU Core PractitionerRole | AU Core Organization | AU Core Patient | AU Core RelatedPerson)	Who is responsible for the observation
value[x]	SΣC	0..1		Actual result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	SC	0..1	CodeableConcept	Why the result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation	S	0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
note	S	0..*	Annotation	Comments about the observation
bodySite	SC	0..1	CodeableConcept	Observed body part Binding: https://healthterminologies.gov.au/fhir/ValueSet/body-site-1 (extensible) au-core-obs-04: If a coded body site is provided, at least one code shall be from SNOMED CT
method	S	0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations.
specimen		0..1	Reference(Specimen)	Specimen used for this observation
device		0..1	Reference(Device | DeviceMetric)	(Measurement) Device
referenceRange	SC	0..*	BackboneElement	Provides guide for interpretation
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
low	SC	0..1	SimpleQuantity	Low Range, if relevant
high	SC	0..1	SimpleQuantity	High Range, if relevant
type	S	0..1	CodeableConcept	Reference range qualifier Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.
appliesTo		0..*	CodeableConcept	Reference range population Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.
age		0..1	Range	Applicable age range, if relevant
text	S	0..1	string	Text based reference range in an observation
hasMember	SΣ	0..*	Reference(AU Core Diagnostic Result Observation | AU Core Diagnostic Imaging Result Observation | AU Core Pathology Result Observation)	Individual observations in a group, study, or panel
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
reference	ΣC	1..1	string	Literal reference, Relative, internal or absolute URL
type	Σ	0..1	uri	Type the reference refers to (e.g. "Patient") Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).
identifier	Σ	0..1	Identifier	Logical reference, when literal reference is not known
display	Σ	0..1	string	Text alternative for the resource
derivedFrom	Σ	0..*	Reference(DocumentReference | ImagingStudy | Media | QuestionnaireResponse | Observation | MolecularSequence)	Related measurements the observation is made from
component	SΣC	0..*	BackboneElement	Component results au-core-obs-06: The component shall at least have a value or a data absent reason
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	SΣ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
value[x]	SΣC	0..1		Actual component result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	SC	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet
Observation.language	preferred	CommonLanguages Additional Bindings Purpose AllLanguages Max Binding
Observation.status	required	https://healthterminologies.gov.au/fhir/ValueSet/observationstatus-result-available-1
Observation.category	preferred	ObservationCategoryCodes
Observation.code	example	LOINCCodes (a valid code from LOINC)
Observation.dataAbsentReason	extensible	DataAbsentReason
Observation.interpretation	extensible	ObservationInterpretationCodes
Observation.bodySite	extensible	https://healthterminologies.gov.au/fhir/ValueSet/body-site-1
Observation.method	example	ObservationMethods
Observation.referenceRange.type	preferred	ObservationReferenceRangeMeaningCodes
Observation.referenceRange.appliesTo	example	ObservationReferenceRangeAppliesToCodes
Observation.hasMember.type	extensible	ResourceType
Observation.component.code	example	LOINCCodes (a valid code from LOINC)
Observation.component.dataAbsentReason	extensible	DataAbsentReason
Observation.component.interpretation	extensible	ObservationInterpretationCodes

Constraints

Id	Grade	Path(s)	Details	Requirements
au-core-obs-01	error	Observation.effective[x]	Date shall be at least to day : $this is DateTime implies $this.toString().length() >= 10
au-core-obs-04	error	Observation.bodySite	If a coded body site is provided, at least one code shall be from SNOMED CT : coding.exists() implies coding.where(system='http://snomed.info/sct').exists()
au-core-obs-06	error	Observation.component	The component shall at least have a value or a data absent reason : value.exists() or dataAbsentReason.exists()

This structure is derived from Observation

Summary

Mandatory: 3 elements (1 nested mandatory element)
Must-Support: 23 elements

Structures

This structure refers to these other structures:

• AU Core Patient (http://hl7.org.au/fhir/core/StructureDefinition/au-core-patient)
• AU Core Practitioner (http://hl7.org.au/fhir/core/StructureDefinition/au-core-practitioner)
• AU Core PractitionerRole (http://hl7.org.au/fhir/core/StructureDefinition/au-core-practitionerrole)
• AU Core Organization (http://hl7.org.au/fhir/core/StructureDefinition/au-core-organization)
• AU Core RelatedPerson (http://hl7.org.au/fhir/core/StructureDefinition/au-core-relatedperson)
• AU Core Diagnostic Result Observation (http://hl7.org.au/fhir/core/StructureDefinition/au-core-diagnosticresult)
• AU Core Diagnostic Imaging Result Observation (http://hl7.org.au/fhir/core/StructureDefinition/au-core-diagnosticresult-imag)
• AU Core Pathology Result Observation (http://hl7.org.au/fhir/core/StructureDefinition/au-core-diagnosticresult-path)

Maturity: 0

Below is an overview of the mandatory and optional search parameters. FHIR search operations and the syntax used to describe the interactions is described here.

Mandatory Search Parameters

The following search parameters and search parameter combinations SHALL be supported:

Optional Search Parameters

The following search parameters and search parameter combinations SHOULD be supported: