AU Core Implementation Guide
0.2.1-preview - Preview
This page is part of the Australian Core IG (v0.2.1-preview: AU Core) based on FHIR R4. For a full list of available versions, see the Directory of published versions
Page standards status: Draft | Maturity Level: 0 |
Definitions for the au-core-patient resource profile.
Guidance on how to interpret the contents of this table can be found here.
1. Patient | |
Invariants | Defined on this element au-core-pat-01: At least one patient identifier shall be valid (: identifier.where(system.count() + value.count() >1).exists()) au-core-pat-02: At least one patient name shall have a family name (: name.family.exists()) |
2. Patient.extension:birthPlace | |
SliceName | birthPlace |
Must Support | true |
3. Patient.extension:indigenousStatus | |
SliceName | indigenousStatus |
Must Support | true |
4. Patient.extension:interpreterRequired | |
SliceName | interpreterRequired |
Must Support | true |
5. Patient.extension:dateOfArrival | |
SliceName | dateOfArrival |
Must Support | true |
6. Patient.identifier | |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 10..* This element is affected by the following invariants: au-core-pat-01, ele-1 |
Must Support | true |
Slicing | This element introduces a set of slices on Patient.identifier. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
7. Patient.identifier:ihi | |
SliceName | ihi |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..1 |
Type | Identifier(AUIHI) |
Must Support | true |
8. Patient.identifier:medicare | |
SliceName | medicare |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..1 |
Type | Identifier(AUMedicareCardNumber) |
Must Support | true |
9. Patient.identifier:dva | |
SliceName | dva |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..1 |
Type | Identifier(AUDVANumber) |
Must Support | true |
10. Patient.active | |
Fixed Value | true |
11. Patient.name | |
Control | 10..* This element is affected by the following invariants: inv-au-core-pat-02 |
Must Support | true |
Comments | A patient may have multiple names with different uses or applicable periods. At least one name SHOULD be the name the patient is considered to have for administrative and record keeping purposes - family name is used to enable matching against patient records. A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns. |
Invariants | Defined on this element au-core-pat-04: At least text, family name, or given name shall be present (: text.exists() or family.exists() or given.exists()) |
12. Patient.telecom | |
Must Support | true |
13. Patient.gender | |
Control | 10..1 |
Must Support | true |
14. Patient.birthDate | |
Control | 10..1 |
Must Support | true |
15. Patient.birthDate.extension:accuracyIndicator | |
SliceName | accuracyIndicator |
Must Support | true |
16. Patient.birthDate.extension:birthTime | |
SliceName | birthTime |
Must Support | true |
17. Patient.address | |
Must Support | true |
18. Patient.communication | |
Must Support | true |
19. Patient.communication.language | |
Must Support | true |
20. Patient.communication.preferred | |
Must Support | true |
Guidance on how to interpret the contents of this table can be found here.
1. Patient | |
Definition | Demographics and other administrative information about an individual receiving care or other health-related services. Demographics and other administrative information about an individual or animal receiving care or other health-related services. |
Control | 0..* |
Summary | false |
Alternate Names | SubjectOfCare Client Resident |
Invariants | Defined on this element au-core-pat-01: At least one patient identifier shall be valid (: identifier.where(system.count() + value.count() >1).exists()) au-core-pat-02: At least one patient name shall have a family name (: name.family.exists()) dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (: text.`div`.exists()) inv-pat-0: If present, birth time's date shall be the birth date (: birthDate.extension('http://hl7.org/fhir/StructureDefinition/patient-birthTime').exists() implies birthDate.extension('http://hl7.org/fhir/StructureDefinition/patient-birthTime').value.toString().substring(0,10) = birthDate.toString()) |
2. Patient.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
3. Patient.extension:birthPlace | |
SliceName | birthPlace |
Definition | The registered place of birth of the patient. A sytem may use the address.text if they don't store the birthPlace address in discrete elements. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(birthPlace) (Extension Type: Address) |
Must Support | true |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
4. Patient.extension:indigenousStatus | |
SliceName | indigenousStatus |
Definition | National Health Data Dictionary (NHDD) based indigenous status for a person. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(AustralianIndigenousStatus) (Extension Type: Coding) |
Must Support | true |
Comments | This concept is equivalent to Australian Institute of Health and Welfare data element 602543 Person—Indigenous status, code N. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
5. Patient.extension:closingTheGapRegistration | |
SliceName | closingTheGapRegistration |
Definition | Indication of eligibility for the Closing the Gap co-payment. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(ClosingTheGapRegistration) (Extension Type: boolean) |
Comments | This concept is equivalent to Australian Institute of Health and Welfare data element 603671 Patient—Closing the Gap co-payment eligibility indicator. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
6. Patient.extension:mothersMaidenName | |
SliceName | mothersMaidenName |
Definition | Mother's maiden (unmarried) name, commonly collected to help verify patient identity. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(mothersMaidenName) (Extension Type: string) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
7. Patient.extension:interpreterRequired | |
SliceName | interpreterRequired |
Definition | This Patient requires an interpreter to communicate healthcare information to the practitioner. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(interpreterRequired) (Extension Type: boolean) |
Must Support | true |
Comments | The Patient does not speak the default language of the organization, and hence requires an interpreter. If the patient has other languages in the Communications list, then that would be the type of interpreter required. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
8. Patient.extension:dateOfArrival | |
SliceName | dateOfArrival |
Definition | The date a person first arrived in Australia, from another country, with the intention of living in Australia for one year or more. This date is captured once for a person and is not subsequently updated with subsequent arrivals. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(DateOfArrivalAustralia) (Extension Type: date) |
Must Support | true |
Comments | See Australian Bureau of Statics (ABS) 1200.0.55.007 - Year of Arrival Standard, 2014, Version 1.5 for further information. This concept is equivalent to Australian Institute of Health and Welfare data element 269447 Person—year of first arrival in Australia. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
9. Patient.extension:genderIdentity | |
SliceName | genderIdentity |
Definition | The gender the patient identifies with. The Patient's gender identity is used as guidance (e.g. for staff) about how to interact with the patient. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(genderIdentity) (Extension Type: CodeableConcept) |
Comments | Gender identity Gender Identity Response (Extensible). See Australian Bureau of Statics (ABS) Standard for Sex, Gender, Variations of Sex Characteristics and Sexual Orientation Variables, 2020 for further materials. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
10. Patient.extension:genderIdentity.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..0* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Patient.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
11. Patient.extension:genderIdentity.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Type | uri |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | http://hl7.org/fhir/StructureDefinition/patient-genderIdentity |
12. Patient.extension:genderIdentity.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 10..1 |
Binding | For example codes, see GenderIdentityFor codes, see (unbound) |
Type | Choice of: CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Summary | false |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Patient.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
|
13. Patient.extension:genderIdentity.value[x]:valueCodeableConcept | |
SliceName | valueCodeableConcept |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 10..1 |
Binding | The codes SHALL be taken from https://healthterminologies.gov.au/fhir/ValueSet/gender-identity-response-1; other codes may be used where these codes are not suitableFor codes, see (unbound) |
Type | Choice of: CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Summary | false |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
14. Patient.extension:individualPronouns | |
SliceName | individualPronouns |
Definition | The pronouns to use when referring to an individual in verbal or written communication. May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | This element is affected by the following invariants: ele-1 |
Type | Extension(PPronouns) (Complex Extension) |
Invariants | Defined on this element ele-1: (: ) ext-1: (: ) |
15. Patient.extension:recordedSexOrGender | |
SliceName | recordedSexOrGender |
Definition | A sex or gender property for the individual from a document or other record May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | This element is affected by the following invariants: ele-1 |
Type | Extension(RecordedSexOrGender) (Complex Extension) |
Invariants | Defined on this element ele-1: (: ) ext-1: (: ) |
16. Patient.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Control | 0..* |
Type | Extension |
Is Modifier | true |
Summary | false |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
17. Patient.identifier | |
Definition | An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers. An identifier for this patient. |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 10..* This element is affected by the following invariants: ele-1, au-core-pat-01 |
Type | Identifier(Identifier, AUIHI, AUMedicareCardNumber, AUDVANumber, AUHealthCareCardNumber, AUPensionerConcessionCardNumber, AUCwlthSeniorsHealthCardNumber, AUMedicalRecordNumber, AUInsuranceMemberNumber) |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
Requirements | Patients are almost always assigned specific numerical identifiers. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Patient.identifier. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
18. Patient.identifier:ihi | |
SliceName | ihi |
Definition | Individual Healthcare Identifier (IHI) assigned under the HI Service to a patient. An identifier for this patient. |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Type | Identifier(AUIHI) |
Must Support | true |
Requirements | Patients are almost always assigned specific numerical identifiers. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) inv-ihi-value-0: IHI shall be an exactly 16 digit number (: value.matches('^([0-9]{16})$')) inv-ihi-value-1: IHI prefix is 800360 (: value.startsWith('800360')) inv-ihi-value-2: IHI shall pass the Luhn algorithm check (: (((select(value.substring(0,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(1,1).toInteger())+(select(value.substring(2,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(3,1).toInteger())+(select(value.substring(4,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(5,1).toInteger())+(select(value.substring(6,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(7,1).toInteger())+(select(value.substring(8,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(9,1).toInteger())+(select(value.substring(10,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(11,1).toInteger())+(select(value.substring(12,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(13,1).toInteger())+(select(value.substring(14,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(15,1).toInteger()))mod 10=0)) |
19. Patient.identifier:medicare | |
SliceName | medicare |
Definition | Medicare card number as either the the 10 digit Medicare card number or the 11 digit number (includes the individual reference number (IRN)). A Medicare card is provided to individuals who are enrolled in Medicare. An identifier for this patient. |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Type | Identifier(AUMedicareCardNumber) |
Must Support | true |
Requirements | Patients are almost always assigned specific numerical identifiers. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
20. Patient.identifier:dva | |
SliceName | dva |
Definition | Department of Veterans’ Affairs (DVA) file number displayed on a Veteran Card. An identifier for this patient. |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Type | Identifier(AUDVANumber) |
Must Support | true |
Requirements | Patients are almost always assigned specific numerical identifiers. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
21. Patient.active | |
Definition | Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules. It is often used to filter patient lists to exclude inactive patients Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death. |
Control | 0..1 |
Type | boolean |
Is Modifier | true |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Need to be able to mark a patient record as not to be used because it was created in error. |
Comments | If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient. |
Meaning if Missing | This resource is generally assumed to be active if no value is provided for the active element |
Fixed Value | true |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
22. Patient.name | |
Definition | A name associated with the individual. |
Control | 10..* This element is affected by the following invariants: inv-au-core-pat-02 |
Type | HumanName |
Must Support | true |
Summary | true |
Requirements | Need to be able to track the patient by multiple names. Examples are your official name and a partner name. |
Comments | A patient may have multiple names with different uses or applicable periods. At least one name SHOULD be the name the patient is considered to have for administrative and record keeping purposes - family name is used to enable matching against patient records. A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns. |
Invariants | Defined on this element au-core-pat-04: At least text, family name, or given name shall be present (: text.exists() or family.exists() or given.exists()) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
23. Patient.telecom | |
Definition | A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted. |
Control | 0..* |
Type | ContactPoint |
Must Support | true |
Summary | true |
Requirements | People have (primary) ways to contact them in some way such as phone, email. |
Comments | A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
24. Patient.gender | |
Definition | Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes. |
Control | 10..1 |
Binding | The codes SHALL be taken from AdministrativeGender The gender of a person used for administrative purposes. |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Needed for identification of the individual, in combination with (at least) name and birth date. |
Comments | The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
25. Patient.birthDate | |
Definition | The date of birth for the individual. |
Control | 10..1 This element is affected by the following invariants: inv-pat-0 |
Type | date |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Age of the individual drives many clinical processes. May include accuracy indicator and specific birth time. Age of the individual drives many clinical processes. |
Comments | At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
LOINC Code | 21112-8 |
26. Patient.birthDate.extension:accuracyIndicator | |
SliceName | accuracyIndicator |
Definition | General date accuracy indicator coding. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(DateAccuracyIndicator) (Extension Type: Coding) |
Must Support | true |
Comments | In some circumstances, systems may capture date or dateTime data that has unknown or estimated parts. This coding indicates the accuracy of the day, month and year parts. This concept is equivalent to Australian Institute of Health and Welfare data element 294418 Date—accuracy indicator. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
27. Patient.birthDate.extension:birthTime | |
SliceName | birthTime |
Definition | The time of day that the Patient was born. This includes the date to ensure that the timezone information can be communicated effectively. |
Control | 0..1 This element is affected by the following invariants: ele-1, inv-pat-0 |
Type | Extension(birthTime) (Extension Type: dateTime) |
Must Support | true |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
28. Patient.deceased[x] | |
Definition | Indicates if the individual is deceased or not. Deceased date accuracy indicator is optional. Indicates if the individual is deceased or not. |
Control | 0..1 |
Type | Choice of: boolean, dateTime |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Is Modifier | true |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive. |
Comments | If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Patient.deceased[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
|
29. Patient.deceased[x]:deceasedBoolean | |
SliceName | deceasedBoolean |
Definition | Boolean indicator if the individual is deceased or not. Indicates if the individual is deceased or not. |
Control | 0..1 |
Type | Choice of: boolean, dateTime |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Is Modifier | true |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive. |
Comments | If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
30. Patient.deceased[x]:deceasedDateTime | |
SliceName | deceasedDateTime |
Definition | Individual deceased date-time with optional accuracy indicator. Indicates if the individual is deceased or not. |
Control | 0..1 |
Type | Choice of: dateTime, boolean |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Is Modifier | true |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive. |
Comments | If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
31. Patient.deceased[x]:deceasedDateTime.extension:accuracyIndicator | |
SliceName | accuracyIndicator |
Definition | General date accuracy indicator coding. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(DateAccuracyIndicator) (Extension Type: Coding) |
Comments | In some circumstances, systems may only have date or datetime data that has unknown or estimated parts. This coding establishes the accuracy of the day, month and year parts. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
32. Patient.address | |
Definition | An Australian address expressed using postal conventions (as opposed to GPS or other location definition formats). An address for the individual. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Address(AustralianAddress, Address) |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
Requirements | May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification. |
Comments | The address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). Patient may have multiple addresses with different uses or applicable periods. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) inv-add-0: The address shall at least have text or a line (: text.exists() or line.exists()) inv-add-1: If asserting no fixed address, the type shall be 'physical' (: extension('http://hl7.org.au/fhir/StructureDefinition/no-fixed-address').exists() implies type='physical') inv-add-2: If asserting no fixed address, the address text shall begin with 'NO FIXED ADDRESS' (: extension('http://hl7.org.au/fhir/StructureDefinition/no-fixed-address').exists() implies text.startsWith('NO FIXED ADDRESS')) |
33. Patient.communication | |
Definition | A language which may be used to communicate with the patient about his or her health. |
Control | 0..* |
Type | BackboneElement |
Must Support | true |
Summary | false |
Requirements | If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest. |
Comments | If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
34. Patient.communication.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Control | 0..* |
Type | Extension |
Is Modifier | true |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
35. Patient.communication.language | |
Definition | The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English. |
Control | 1..1 |
Binding | The codes SHALL be taken from https://healthterminologies.gov.au/fhir/ValueSet/common-languages-australia-2; other codes may be used where these codes are not suitableThe codes SHOULD be taken from CommonLanguages |
Type | CodeableConcept |
Must Support | true |
Summary | false |
Requirements | Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect. |
Comments | The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
36. Patient.communication.preferred | |
Definition | Indicates whether or not the patient prefers this language (over other languages he masters up a certain level). |
Control | 0..1 |
Type | boolean |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | false |
Requirements | People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method. |
Comments | This language is specifically identified for communicating healthcare information. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
37. Patient.link | |
Definition | Link to a Patient or RelatedPerson resource that concerns the same actual person. Link to another patient resource that concerns the same actual patient. |
Control | 0..* |
Type | BackboneElement |
Is Modifier | true |
Summary | true |
Requirements | There are multiple use cases:
|
Comments | There is no assumption that linked patient records have mutual links. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
38. Patient.link.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Control | 0..* |
Type | Extension |
Is Modifier | true |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
39. Patient.link.other | |
Definition | The other patient resource that the link refers to. |
Control | 1..1 |
Type | Reference(Patient|RelatedPerson) |
Summary | true |
Comments | Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
40. Patient.link.type | |
Definition | The type of link between this patient resource and another patient resource. |
Control | 1..1 |
Binding | The codes SHALL be taken from LinkType The type of link between this patient resource and another patient resource. |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here.
1. Patient | |||||
Definition | Demographics and other administrative information about an individual receiving care or other health-related services. | ||||
Control | 0..* | ||||
Summary | false | ||||
Alternate Names | SubjectOfCare Client Resident | ||||
2. Patient.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Control | 0..1 | ||||
Type | id | ||||
Summary | true | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
3. Patient.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Summary | true | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
4. Patient.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | true | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
5. Patient.language | |||||
Definition | The base language in which the resource is written. | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages
A human language
| ||||
Type | code | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
6. Patient.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Control | 0..1 | ||||
Type | Narrative | ||||
Summary | false | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
7. Patient.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Summary | false | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
8. Patient.extension | |||||
Definition | An Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on Patient.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
9. Patient.extension:birthPlace | |||||
SliceName | birthPlace | ||||
Definition | The registered place of birth of the patient. A sytem may use the address.text if they don't store the birthPlace address in discrete elements. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(birthPlace) (Extension Type: Address) | ||||
Must Support | true | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
10. Patient.extension:indigenousStatus | |||||
SliceName | indigenousStatus | ||||
Definition | National Health Data Dictionary (NHDD) based indigenous status for a person. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(AustralianIndigenousStatus) (Extension Type: Coding) | ||||
Must Support | true | ||||
Comments | This concept is equivalent to Australian Institute of Health and Welfare data element 602543 Person—Indigenous status, code N. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
11. Patient.extension:closingTheGapRegistration | |||||
SliceName | closingTheGapRegistration | ||||
Definition | Indication of eligibility for the Closing the Gap co-payment. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(ClosingTheGapRegistration) (Extension Type: boolean) | ||||
Comments | This concept is equivalent to Australian Institute of Health and Welfare data element 603671 Patient—Closing the Gap co-payment eligibility indicator. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
12. Patient.extension:mothersMaidenName | |||||
SliceName | mothersMaidenName | ||||
Definition | Mother's maiden (unmarried) name, commonly collected to help verify patient identity. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(mothersMaidenName) (Extension Type: string) | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
13. Patient.extension:interpreterRequired | |||||
SliceName | interpreterRequired | ||||
Definition | This Patient requires an interpreter to communicate healthcare information to the practitioner. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(interpreterRequired) (Extension Type: boolean) | ||||
Must Support | true | ||||
Comments | The Patient does not speak the default language of the organization, and hence requires an interpreter. If the patient has other languages in the Communications list, then that would be the type of interpreter required. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
14. Patient.extension:dateOfArrival | |||||
SliceName | dateOfArrival | ||||
Definition | The date a person first arrived in Australia, from another country, with the intention of living in Australia for one year or more. This date is captured once for a person and is not subsequently updated with subsequent arrivals. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(DateOfArrivalAustralia) (Extension Type: date) | ||||
Must Support | true | ||||
Comments | See Australian Bureau of Statics (ABS) 1200.0.55.007 - Year of Arrival Standard, 2014, Version 1.5 for further information. This concept is equivalent to Australian Institute of Health and Welfare data element 269447 Person—year of first arrival in Australia. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
15. Patient.extension:genderIdentity | |||||
SliceName | genderIdentity | ||||
Definition | The gender the patient identifies with. The Patient's gender identity is used as guidance (e.g. for staff) about how to interact with the patient. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(genderIdentity) (Extension Type: CodeableConcept) | ||||
Comments | Gender identity Gender Identity Response (Extensible). See Australian Bureau of Statics (ABS) Standard for Sex, Gender, Variations of Sex Characteristics and Sexual Orientation Variables, 2020 for further materials. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
16. Patient.extension:genderIdentity.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
17. Patient.extension:genderIdentity.extension | |||||
Definition | An Extension | ||||
Control | 0..0 | ||||
Type | Extension | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on Patient.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
18. Patient.extension:genderIdentity.url | |||||
Definition | Source of the definition for the extension code - a logical name or a URL. | ||||
Control | 1..1 | ||||
Type | uri | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. | ||||
Fixed Value | http://hl7.org/fhir/StructureDefinition/patient-genderIdentity | ||||
19. Patient.extension:genderIdentity.value[x] | |||||
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). | ||||
Control | 1..1 | ||||
Binding | For example codes, see GenderIdentity | ||||
Type | CodeableConcept | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
Slicing | This element introduces a set of slices on Patient.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
| ||||
20. Patient.extension:genderIdentity.value[x]:valueCodeableConcept | |||||
SliceName | valueCodeableConcept | ||||
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from https://healthterminologies.gov.au/fhir/ValueSet/gender-identity-response-1; other codes may be used where these codes are not suitable | ||||
Type | CodeableConcept | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
21. Patient.extension:individualPronouns | |||||
SliceName | individualPronouns | ||||
Definition | The pronouns to use when referring to an individual in verbal or written communication. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension(PPronouns) (Complex Extension) | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
22. Patient.extension:recordedSexOrGender | |||||
SliceName | recordedSexOrGender | ||||
Definition | A sex or gender property for the individual from a document or other record | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension(RecordedSexOrGender) (Complex Extension) | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
23. Patient.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Summary | false | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
24. Patient.identifier | |||||
Definition | An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers. | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 1..* This element is affected by the following invariants: ele-1, au-core-pat-01 | ||||
Type | Identifier(Identifier, AUIHI, AUMedicareCardNumber, AUDVANumber, AUHealthCareCardNumber, AUPensionerConcessionCardNumber, AUCwlthSeniorsHealthCardNumber, AUMedicalRecordNumber, AUInsuranceMemberNumber) | ||||
Must Support | true | ||||
Must Support Types | No must-support rules about the choice of types/profiles | ||||
Requirements | Patients are almost always assigned specific numerical identifiers. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
Slicing | This element introduces a set of slices on Patient.identifier. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
25. Patient.identifier:ihi | |||||
SliceName | ihi | ||||
Definition | Individual Healthcare Identifier (IHI) assigned under the HI Service to a patient. | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Identifier(AUIHI) | ||||
Must Support | true | ||||
Requirements | Patients are almost always assigned specific numerical identifiers. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) inv-ihi-value-0: IHI shall be an exactly 16 digit number (: value.matches('^([0-9]{16})$')) inv-ihi-value-1: IHI prefix is 800360 (: value.startsWith('800360')) inv-ihi-value-2: IHI shall pass the Luhn algorithm check (: (((select(value.substring(0,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(1,1).toInteger())+(select(value.substring(2,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(3,1).toInteger())+(select(value.substring(4,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(5,1).toInteger())+(select(value.substring(6,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(7,1).toInteger())+(select(value.substring(8,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(9,1).toInteger())+(select(value.substring(10,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(11,1).toInteger())+(select(value.substring(12,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(13,1).toInteger())+(select(value.substring(14,1).toInteger()).select(iif($this<5, $this*2, (($this*2)-9))))+(value.substring(15,1).toInteger()))mod 10=0)) | ||||
26. Patient.identifier:medicare | |||||
SliceName | medicare | ||||
Definition | Medicare card number as either the the 10 digit Medicare card number or the 11 digit number (includes the individual reference number (IRN)). A Medicare card is provided to individuals who are enrolled in Medicare. | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Identifier(AUMedicareCardNumber) | ||||
Must Support | true | ||||
Requirements | Patients are almost always assigned specific numerical identifiers. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
27. Patient.identifier:dva | |||||
SliceName | dva | ||||
Definition | Department of Veterans’ Affairs (DVA) file number displayed on a Veteran Card. | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Identifier(AUDVANumber) | ||||
Must Support | true | ||||
Requirements | Patients are almost always assigned specific numerical identifiers. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
28. Patient.active | |||||
Definition | Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules. It is often used to filter patient lists to exclude inactive patients Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death. | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Is Modifier | true | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Need to be able to mark a patient record as not to be used because it was created in error. | ||||
Comments | If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient. | ||||
Meaning if Missing | This resource is generally assumed to be active if no value is provided for the active element | ||||
Fixed Value | true | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
29. Patient.name | |||||
Definition | A name associated with the individual. | ||||
Control | 1..* This element is affected by the following invariants: inv-au-core-pat-02 | ||||
Type | HumanName | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Need to be able to track the patient by multiple names. Examples are your official name and a partner name. | ||||
Comments | A patient may have multiple names with different uses or applicable periods. At least one name SHOULD be the name the patient is considered to have for administrative and record keeping purposes - family name is used to enable matching against patient records. | ||||
Invariants | Defined on this element au-core-pat-04: At least text, family name, or given name shall be present (: text.exists() or family.exists() or given.exists()) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
30. Patient.telecom | |||||
Definition | A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted. | ||||
Control | 0..* | ||||
Type | ContactPoint | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | People have (primary) ways to contact them in some way such as phone, email. | ||||
Comments | A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
31. Patient.gender | |||||
Definition | Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from AdministrativeGender The gender of a person used for administrative purposes | ||||
Type | code | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Needed for identification of the individual, in combination with (at least) name and birth date. | ||||
Comments | The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
32. Patient.birthDate | |||||
Definition | The date of birth for the individual. | ||||
Control | 1..1 This element is affected by the following invariants: inv-pat-0 | ||||
Type | date | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Age of the individual drives many clinical processes. May include accuracy indicator and specific birth time. | ||||
Comments | At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
LOINC Code | 21112-8 | ||||
33. Patient.birthDate.id | |||||
Definition | unique id for the element within a resource (for internal references) | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
34. Patient.birthDate.extension | |||||
Definition | An Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on Patient.birthDate.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
35. Patient.birthDate.extension:accuracyIndicator | |||||
SliceName | accuracyIndicator | ||||
Definition | General date accuracy indicator coding. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(DateAccuracyIndicator) (Extension Type: Coding) | ||||
Must Support | true | ||||
Comments | In some circumstances, systems may capture date or dateTime data that has unknown or estimated parts. This coding indicates the accuracy of the day, month and year parts. This concept is equivalent to Australian Institute of Health and Welfare data element 294418 Date—accuracy indicator. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
36. Patient.birthDate.extension:birthTime | |||||
SliceName | birthTime | ||||
Definition | The time of day that the Patient was born. This includes the date to ensure that the timezone information can be communicated effectively. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1, inv-pat-0 | ||||
Type | Extension(birthTime) (Extension Type: dateTime) | ||||
Must Support | true | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
37. Patient.birthDate.value | |||||
Definition | The actual value | ||||
Control | 0..1 | ||||
Type | date | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
38. Patient.deceased[x] | |||||
Definition | Indicates if the individual is deceased or not. Deceased date accuracy indicator is optional. | ||||
Control | 0..1 | ||||
Type | Choice of: boolean, dateTime | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Is Modifier | true | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive. | ||||
Comments | If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
Slicing | This element introduces a set of slices on Patient.deceased[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
| ||||
39. Patient.deceased[x]:deceasedBoolean | |||||
SliceName | deceasedBoolean | ||||
Definition | Boolean indicator if the individual is deceased or not. | ||||
Control | 0..1 | ||||
Type | boolean | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Is Modifier | true | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive. | ||||
Comments | If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
40. Patient.deceased[x]:deceasedDateTime | |||||
SliceName | deceasedDateTime | ||||
Definition | Individual deceased date-time with optional accuracy indicator. | ||||
Control | 0..1 | ||||
Type | dateTime | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Is Modifier | true | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive. | ||||
Comments | If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
41. Patient.deceased[x]:deceasedDateTime.id | |||||
Definition | unique id for the element within a resource (for internal references) | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
42. Patient.deceased[x]:deceasedDateTime.extension | |||||
Definition | An Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on Patient.deceased[x].extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
43. Patient.deceased[x]:deceasedDateTime.extension:accuracyIndicator | |||||
SliceName | accuracyIndicator | ||||
Definition | General date accuracy indicator coding. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(DateAccuracyIndicator) (Extension Type: Coding) | ||||
Comments | In some circumstances, systems may only have date or datetime data that has unknown or estimated parts. This coding establishes the accuracy of the day, month and year parts. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
44. Patient.deceased[x]:deceasedDateTime.value | |||||
Definition | The actual value | ||||
Control | 0..1 | ||||
Type | dateTime | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
45. Patient.address | |||||
Definition | An Australian address expressed using postal conventions (as opposed to GPS or other location definition formats). | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Address(AustralianAddress, Address) | ||||
Must Support | true | ||||
Must Support Types | No must-support rules about the choice of types/profiles | ||||
Requirements | May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification. | ||||
Comments | The address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) inv-add-0: The address shall at least have text or a line (: text.exists() or line.exists()) inv-add-1: If asserting no fixed address, the type shall be 'physical' (: extension('http://hl7.org.au/fhir/StructureDefinition/no-fixed-address').exists() implies type='physical') inv-add-2: If asserting no fixed address, the address text shall begin with 'NO FIXED ADDRESS' (: extension('http://hl7.org.au/fhir/StructureDefinition/no-fixed-address').exists() implies text.startsWith('NO FIXED ADDRESS')) | ||||
46. Patient.maritalStatus | |||||
Definition | This field contains a patient's most recent marital (civil) status. | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from Marital Status Codes; other codes may be used where these codes are not suitable The domestic partnership status of a person | ||||
Type | CodeableConcept | ||||
Summary | false | ||||
Requirements | Most, if not all systems capture it. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
47. Patient.multipleBirth[x] | |||||
Definition | Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer). | ||||
Control | 0..1 | ||||
Type | Choice of: boolean, integer | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs. | ||||
Comments | Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
48. Patient.photo | |||||
Definition | Image of the patient. | ||||
Control | 0..* | ||||
Type | Attachment | ||||
Summary | false | ||||
Requirements | Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too. | ||||
Comments | Guidelines:
| ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
49. Patient.contact | |||||
Definition | A contact party (e.g. guardian, partner, friend) for the patient. | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Summary | false | ||||
Requirements | Need to track people you can contact about the patient. | ||||
Comments | Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) pat-1: SHALL at least contain a contact's details or a reference to an organization (: name.exists() or telecom.exists() or address.exists() or organization.exists()) | ||||
50. Patient.contact.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
51. Patient.contact.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
52. Patient.contact.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
53. Patient.contact.relationship | |||||
Definition | The nature of the relationship between the patient and the contact person. | ||||
Control | 0..* | ||||
Binding | The codes SHALL be taken from https://healthterminologies.gov.au/fhir/ValueSet/contact-relationship-type-3; other codes may be used where these codes are not suitable | ||||
Type | CodeableConcept | ||||
Summary | false | ||||
Requirements | Used to determine which contact person is the most relevant to approach, depending on circumstances. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
54. Patient.contact.name | |||||
Definition | A name associated with the contact person. | ||||
Control | 0..1 | ||||
Type | HumanName | ||||
Summary | false | ||||
Requirements | Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
55. Patient.contact.telecom | |||||
Definition | A contact detail for the person, e.g. a telephone number or an email address. | ||||
Control | 0..* | ||||
Type | ContactPoint | ||||
Summary | false | ||||
Requirements | People have (primary) ways to contact them in some way such as phone, email. | ||||
Comments | Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
56. Patient.contact.address | |||||
Definition | An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Address(Address, AustralianAddress) | ||||
Requirements | Need to keep track where the contact person can be contacted per postal mail or visited. | ||||
Comments | The address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
57. Patient.contact.gender | |||||
Definition | Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes. | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from AdministrativeGender The gender of a person used for administrative purposes | ||||
Type | code | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Needed to address the person correctly. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
58. Patient.contact.organization | |||||
Definition | Organization on behalf of which the contact is acting or for which the contact is working. | ||||
Control | 0..1 This element is affected by the following invariants: pat-1 | ||||
Type | Reference(Organization) | ||||
Summary | false | ||||
Requirements | For guardians or business related contacts, the organization is relevant. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
59. Patient.contact.period | |||||
Definition | The period during which this contact person or organization is valid to be contacted relating to this patient. | ||||
Control | 0..1 | ||||
Type | Period | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
60. Patient.communication | |||||
Definition | A language which may be used to communicate with the patient about his or her health. | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Must Support | true | ||||
Summary | false | ||||
Requirements | If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest. | ||||
Comments | If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
61. Patient.communication.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
62. Patient.communication.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
63. Patient.communication.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
64. Patient.communication.language | |||||
Definition | The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from https://healthterminologies.gov.au/fhir/ValueSet/common-languages-australia-2; other codes may be used where these codes are not suitable | ||||
Type | CodeableConcept | ||||
Must Support | true | ||||
Summary | false | ||||
Requirements | Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect. | ||||
Comments | The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
65. Patient.communication.preferred | |||||
Definition | Indicates whether or not the patient prefers this language (over other languages he masters up a certain level). | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | false | ||||
Requirements | People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method. | ||||
Comments | This language is specifically identified for communicating healthcare information. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
66. Patient.generalPractitioner | |||||
Definition | Patient's nominated care provider. | ||||
Control | 0..* | ||||
Type | Reference(Organization|Practitioner|PractitionerRole) | ||||
Summary | false | ||||
Alternate Names | careProvider | ||||
Comments | This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues. Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
67. Patient.managingOrganization | |||||
Definition | Organization that is the custodian of the patient record. | ||||
Control | 0..1 | ||||
Type | Reference(Organization) | ||||
Summary | true | ||||
Requirements | Need to know who recognizes this patient record, manages and updates it. | ||||
Comments | There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
68. Patient.link | |||||
Definition | Link to a Patient or RelatedPerson resource that concerns the same actual person. | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | true | ||||
Summary | true | ||||
Requirements | There are multiple use cases:
| ||||
Comments | There is no assumption that linked patient records have mutual links. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
69. Patient.link.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
70. Patient.link.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
71. Patient.link.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
72. Patient.link.other | |||||
Definition | The other patient resource that the link refers to. | ||||
Control | 1..1 | ||||
Type | Reference(Patient|RelatedPerson) | ||||
Summary | true | ||||
Comments | Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
73. Patient.link.type | |||||
Definition | The type of link between this patient resource and another patient resource. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from LinkType The type of link between this patient resource and another patient resource | ||||
Type | code | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |