AU Core Implementation Guide
0.2.0-preview - QA Preview Australia flag

This page is part of the Australian Core IG (v0.2.0-preview: AU Core) based on FHIR R4. For a full list of available versions, see the Directory of published versions

Resource Profile: AUListCore - Detailed Descriptions

Page standards status: Draft Maturity Level: 0

Definitions for the au-core-list resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. List
InvariantsDefined on this element
au-core-lst-01: The list shall have at least a source or a source relating person (: source.exists() or extension('http://hl7.org.au/fhir/StructureDefinition/author-related-person').exists())
2. List.extension
SlicingThis element introduces a set of slices on List.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
3. List.extension:sourceRelatedPerson
SliceNamesourceRelatedPerson
Definition

The related person responsible for deciding what the contents of the list were. This is the same as the author of the list.

Control0..? This element is affected by the following invariants: au-core-lst-01
TypeExtension(AuthorRelatedPerson) (Extension Type: Reference(RelatedPerson))
Must Supporttrue
4. List.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Must Supporttrue
5. List.status
Must Supporttrue
Pattern Valuecurrent
6. List.mode
Must Supporttrue
7. List.title
Must Supporttrue
8. List.code
Control10..1
Must Supporttrue
9. List.subject
Control10..1
TypeReference(AUCorePatient|Patient|Group|Device|Location)
Must Supporttrue
10. List.encounter
TypeReference(AUCoreEncounter|Encounter)
Must Supporttrue
11. List.date
Control10..1 This element is affected by the following invariants: au-core-lst-02
Must Supporttrue
InvariantsDefined on this element
au-core-lst-02: Date shall be at least to day (: toString().length() >= 10)
12. List.source
Control This element is affected by the following invariants: au-core-lst-01
TypeReference(AUCorePractitioner|AUCorePractitionerRole|AUCorePatient|AUCoreDeviceSystem|Practitioner|PractitionerRole|Patient|Device)
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
13. List.note
Must Supporttrue
14. List.entry
Must Supporttrue
15. List.entry.extension:changeDescription
SliceNamechangeDescription
Control0..1
TypeExtension(ChangeDescription) (Extension Type: string)
16. List.entry.flag
Must Supporttrue
17. List.entry.item
Must Supporttrue
18. List.emptyReason
Must Supporttrue

Guidance on how to interpret the contents of this table can be found here.

1. List
Definition

A list is a curated collection of resources.

Control0..*
Summaryfalse
Alternate NamesCollection, WorkingList, Organizer
InvariantsDefined on this element
au-core-lst-01: The list shall have at least a source or a source relating person (: source.exists() or extension('http://hl7.org.au/fhir/StructureDefinition/author-related-person').exists())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (: text.`div`.exists())
lst-1: A list can only have an emptyReason if it is empty (: emptyReason.empty() or entry.empty())
lst-2: The deleted flag can only be used if the mode of the list is "changes" (: mode = 'changes' or entry.deleted.empty())
lst-3: An entry date can only be used if the mode of the list is "working" (: mode = 'working' or entry.date.empty())
2. List.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
3. List.extension
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on List.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
4. List.extension:sourceRelatedPerson
SliceNamesourceRelatedPerson
Definition

The related person responsible for deciding what the contents of the list were. This is the same as the author of the list.

Control0..1 This element is affected by the following invariants: ele-1, au-core-lst-01
TypeExtension(AuthorRelatedPerson) (Extension Type: Reference(RelatedPerson))
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
5. List.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
6. List.identifier
Definition

Identifier for the List assigned for business purposes outside the context of FHIR.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Must Supporttrue
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. List.status
Definition

Indicates the current state of this list.

Control1..1
BindingThe codes SHALL be taken from ListStatus

The current state of the list.

Typecode
Is Modifiertrue
Must Supporttrue
Summarytrue
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Pattern Valuecurrent
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
8. List.mode
Definition

How this list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted.

Control1..1
BindingThe codes SHALL be taken from ListMode

The processing mode that applies to this list.

Typecode
Is Modifiertrue
Must Supporttrue
Summarytrue
Requirements

Lists are used in various ways, and it must be known in what way it is safe to use them.

Comments

This element is labeled as a modifier because a change list must not be misunderstood as a complete list.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
9. List.title
Definition

A label for the list assigned by the author.

Control0..1
Typestring
Must Supporttrue
Summarytrue
Requirements

Allows customization beyond just the code identifying the kind of list.

Example
General:Dr. Jane's Patients
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
10. List.code
Definition

This code defines the purpose of the list - why it was created.

Control10..1
BindingFor example codes, see ExampleUseCodesForList

What the purpose of a list is.

TypeCodeableConcept
Must Supporttrue
Summarytrue
Requirements

Lists often contain subsets of resources rather than an exhaustive list. The code identifies what type of subset is included.

Comments

If there is no code, the purpose of the list is implied where it is used, such as in a document section using Document.section.code.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. List.subject
Definition

The common subject (or patient) of the resources that are in the list if there is one.

Control10..1
TypeReference(AUCorePatient|Patient|Group|Device|Location)
Must Supporttrue
Summarytrue
Requirements

The primary purpose of listing the subject explicitly is to help with finding the right list.

Comments

Some purely arbitrary lists do not have a common subject, so this is optional.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. List.encounter
Definition

The encounter that is the context in which this list was created.

Control0..1
TypeReference(AUCoreEncounter|Encounter)
Must Supporttrue
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. List.date
Definition

The date that the list was prepared.

Control10..1 This element is affected by the following invariants: au-core-lst-02
TypedateTime
Must Supporttrue
Summarytrue
Requirements

Identifies how current the list is which affects relevance.

Comments

The actual important date is the date of currency of the resources that were summarized, but it is usually assumed that these are current when the preparation occurs.

InvariantsDefined on this element
au-core-lst-02: Date shall be at least to day (: toString().length() >= 10)
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. List.source
Definition

The entity responsible for deciding what the contents of the list were. Where the list was created by a human, this is the same as the author of the list.

Control0..1 This element is affected by the following invariants: au-core-lst-01
TypeReference(AUCorePractitioner|AUCorePractitionerRole|AUCorePatient|AUCoreDeviceSystem|Practitioner|PractitionerRole|Patient|Device)
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Requirements

Allows follow-up as well as context.

Alternate NamesAuthor
Comments

The primary source is the entity that made the decisions what items are in the list. This may be software or user.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. List.note
Definition

Comments that apply to the overall list.

Control0..*
TypeAnnotation
Must Supporttrue
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. List.entry
Definition

Entries in this list.

Control0..* This element is affected by the following invariants: lst-1
TypeBackboneElement
Must Supporttrue
Summaryfalse
Comments

If there are no entries in the list, an emptyReason SHOULD be provided.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. List.entry.extension:changeDescription
SliceNamechangeDescription
Definition

Description of a change including the reason for change.

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ChangeDescription) (Extension Type: string)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
18. List.entry.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
19. List.entry.flag
Definition

The flag allows the system constructing the list to indicate the role and significance of the item in the list.

Control0..1
BindingFor example codes, see PatientMedicineChangeTypes

Codes that provide further information about the reason and meaning of the item in the list.

TypeCodeableConcept
Must Supporttrue
Summaryfalse
Requirements

This field is present to support various clinical uses of lists, such as a discharge summary medication list, where flags specify whether the medication was added, modified, or deleted from the list.

Comments

The flag can only be understood in the context of the List.code. If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Deleted can only be used if the List.mode is "changes".

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
20. List.entry.deleted
Definition

True if this item is marked as deleted in the list.

Control0..1 This element is affected by the following invariants: lst-2
Typeboolean
Is Modifiertrue
Summaryfalse
Requirements

The flag element may contain codes that an application processing the list does not understand. However there can be no ambiguity if a list item is actually marked as "deleted".

Comments

If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Both flag and deleted can only be used if the List.mode is "changes". A deleted entry should be displayed in narrative as deleted. This element is labeled as a modifier because it indicates that an item is (to be) no longer in the list.

Meaning if MissingList items are generally only treated as deleted when this element explicitly carries a value of true. Systems SHOULD always populate this value when mode is 'changes'
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
21. List.entry.item
Definition

A reference to the actual resource from which data was derived.

Control1..1
TypeReference(Resource)
Must Supporttrue
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. List.emptyReason
Definition

If the list is empty, why the list is empty.

Control0..1 This element is affected by the following invariants: lst-1
BindingThe codes SHOULD be taken from ListEmptyReasons

If a list is empty, why it is empty.

TypeCodeableConcept
Must Supporttrue
Summaryfalse
Requirements

Allows capturing things like "none exist" or "not asked" which can be important for most lists.

Comments

The various reasons for an empty list make a significant interpretation to its interpretation. Note that this code is for use when the entire list has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. List
Definition

A list is a curated collection of resources.

Control0..*
Summaryfalse
Alternate NamesCollection, WorkingList, Organizer
2. List.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typeid
Summarytrue
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

3. List.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Control0..1
TypeMeta
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
4. List.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. List.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages A human language
Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Summaryfalse
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. List.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1
TypeNarrative
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. List.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Control0..*
TypeResource
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

8. List.extension
Definition

An Extension

Control0..*
TypeExtension
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on List.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
9. List.extension:sourceRelatedPerson
SliceNamesourceRelatedPerson
Definition

The related person responsible for deciding what the contents of the list were. This is the same as the author of the list.

Control0..1 This element is affected by the following invariants: ele-1, au-core-lst-01
TypeExtension(AuthorRelatedPerson) (Extension Type: Reference(RelatedPerson))
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. List.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
11. List.identifier
Definition

Identifier for the List assigned for business purposes outside the context of FHIR.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Must Supporttrue
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. List.status
Definition

Indicates the current state of this list.

Control1..1
BindingThe codes SHALL be taken from ListStatus The current state of the list
Typecode
Is Modifiertrue
Must Supporttrue
Summarytrue
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Pattern Valuecurrent
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. List.mode
Definition

How this list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted.

Control1..1
BindingThe codes SHALL be taken from ListMode The processing mode that applies to this list
Typecode
Is Modifiertrue
Must Supporttrue
Summarytrue
Requirements

Lists are used in various ways, and it must be known in what way it is safe to use them.

Comments

This element is labeled as a modifier because a change list must not be misunderstood as a complete list.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. List.title
Definition

A label for the list assigned by the author.

Control0..1
Typestring
Must Supporttrue
Summarytrue
Requirements

Allows customization beyond just the code identifying the kind of list.

Example
General:Dr. Jane's Patients
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. List.code
Definition

This code defines the purpose of the list - why it was created.

Control1..1
BindingFor example codes, see ExampleUseCodesForList What the purpose of a list is
TypeCodeableConcept
Must Supporttrue
Summarytrue
Requirements

Lists often contain subsets of resources rather than an exhaustive list. The code identifies what type of subset is included.

Comments

If there is no code, the purpose of the list is implied where it is used, such as in a document section using Document.section.code.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. List.subject
Definition

The common subject (or patient) of the resources that are in the list if there is one.

Control1..1
TypeReference(AUCorePatient)
Must Supporttrue
Summarytrue
Requirements

The primary purpose of listing the subject explicitly is to help with finding the right list.

Comments

Some purely arbitrary lists do not have a common subject, so this is optional.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. List.encounter
Definition

The encounter that is the context in which this list was created.

Control0..1
TypeReference(AUCoreEncounter)
Must Supporttrue
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. List.date
Definition

The date that the list was prepared.

Control1..1 This element is affected by the following invariants: au-core-lst-02
TypedateTime
Must Supporttrue
Summarytrue
Requirements

Identifies how current the list is which affects relevance.

Comments

The actual important date is the date of currency of the resources that were summarized, but it is usually assumed that these are current when the preparation occurs.

InvariantsDefined on this element
au-core-lst-02: Date shall be at least to day (: toString().length() >= 10)
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. List.source
Definition

The entity responsible for deciding what the contents of the list were. Where the list was created by a human, this is the same as the author of the list.

Control0..1 This element is affected by the following invariants: au-core-lst-01
TypeReference(AUCorePractitioner|AUCorePractitionerRole|AUCorePatient|AUCoreDeviceSystem)
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Requirements

Allows follow-up as well as context.

Alternate NamesAuthor
Comments

The primary source is the entity that made the decisions what items are in the list. This may be software or user.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
20. List.orderedBy
Definition

What order applies to the items in the list.

Control0..1
BindingThe codes SHOULD be taken from ListOrderCodes What order applies to the items in a list
TypeCodeableConcept
Summaryfalse
Requirements

Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries.

Comments

Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
21. List.note
Definition

Comments that apply to the overall list.

Control0..*
TypeAnnotation
Must Supporttrue
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. List.entry
Definition

Entries in this list.

Control0..* This element is affected by the following invariants: lst-1
TypeBackboneElement
Must Supporttrue
Summaryfalse
Comments

If there are no entries in the list, an emptyReason SHOULD be provided.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. List.entry.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
24. List.entry.extension
Definition

An Extension

Control0..*
TypeExtension
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on List.entry.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
25. List.entry.extension:changeDescription
SliceNamechangeDescription
Definition

Description of a change including the reason for change.

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ChangeDescription) (Extension Type: string)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
26. List.entry.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
27. List.entry.flag
Definition

The flag allows the system constructing the list to indicate the role and significance of the item in the list.

Control0..1
BindingFor example codes, see PatientMedicineChangeTypes Codes that provide further information about the reason and meaning of the item in the list
TypeCodeableConcept
Must Supporttrue
Summaryfalse
Requirements

This field is present to support various clinical uses of lists, such as a discharge summary medication list, where flags specify whether the medication was added, modified, or deleted from the list.

Comments

The flag can only be understood in the context of the List.code. If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Deleted can only be used if the List.mode is "changes".

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. List.entry.deleted
Definition

True if this item is marked as deleted in the list.

Control0..1 This element is affected by the following invariants: lst-2
Typeboolean
Is Modifiertrue
Summaryfalse
Requirements

The flag element may contain codes that an application processing the list does not understand. However there can be no ambiguity if a list item is actually marked as "deleted".

Comments

If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Both flag and deleted can only be used if the List.mode is "changes". A deleted entry should be displayed in narrative as deleted. This element is labeled as a modifier because it indicates that an item is (to be) no longer in the list.

Meaning if MissingList items are generally only treated as deleted when this element explicitly carries a value of true. Systems SHOULD always populate this value when mode is 'changes'
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. List.entry.date
Definition

When this item was added to the list.

Control0..1
TypedateTime
Summaryfalse
Requirements

The date may be significant for understanding the meaning of items in a working list.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. List.entry.item
Definition

A reference to the actual resource from which data was derived.

Control1..1
TypeReference(Resource)
Must Supporttrue
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
31. List.emptyReason
Definition

If the list is empty, why the list is empty.

Control0..1 This element is affected by the following invariants: lst-1
BindingThe codes SHOULD be taken from ListEmptyReasons If a list is empty, why it is empty
TypeCodeableConcept
Must Supporttrue
Summaryfalse
Requirements

Allows capturing things like "none exist" or "not asked" which can be important for most lists.

Comments

The various reasons for an empty list make a significant interpretation to its interpretation. Note that this code is for use when the entire list has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))